Men's haircuts for hairdressers. Men's haircuts technology. What does a Canadian men's hairstyle look like and options for modern haircuts

This chapter is dedicated to classic, model and creative men's haircuts.
The pages show examples and types of different men's hairstyles.
Regardless of your age, you can choose one or another fashionable men's hairstyle, and learn in detail how a haircut is done.
This information will be useful for both novice hairdressers and professionals in hairdressing. A novice hairdresser will be able to learn the technology for performing such men's haircuts as a simple men's haircut, graduated caret, men's sports style haircut, or such popular men's haircuts as boxing, half-boxing or hedgehog haircut, etc., and a professional master hairdresser will once again test your knowledge, or find something new to improve your skills
All men's haircuts are given with a full description and pictures.
Choose, look, experiment - everything is in your hands!

Simple men's haircut

Hair: not too thick.
Tools for performing a simple men's haircut: straight scissors.
Skill Level: Beginner.

This is a neat, not very short men's haircut, performed using the strand by strand method.
The essence of this simple men's haircut is that the length of the hair is the same throughout the head.
Such a simple men's haircut can be performed even by someone who has never held hairdressing scissors in his hands.
To do this, before starting a simple men's haircut, he will have to read some pages of the site,
to see how to properly hold hairdressing scissors, which means the method of cutting hair strand by strand,
straight cut (methods for processing hair strands) and hair pulling by 90 °.
Performing a simple men's haircut
Wet the client's hair before starting the haircut, comb the hair. It is better if you do not just wet your hair, but wash it.
In men's haircuts, the head is washed twice: at the beginning of the haircut and at the end of the haircut.
Divide your hair into zones. To divide the hair into zones, draw vertical partings from the frontal depressions to the edging line at the back of the head.
These cuts must be parallel.
Make a sagittal parting and you will have six zones: the parietal zone, two temporal zones, the middle occipital and two lateral occipital zones.
In the parietal zone at the marginal hairline, select a strand of hair, cut off a strand of hair at a distance of 3-4 cm from the roots. This strand of hair will be the control. We cut the entire parietal zone using the strand by strand method with a hair extension of 90 °.
We go down to whiskey. The control strand is at the edge of the hairline in the face. The parting is vertical, the temporal zones are cut like parietal. You are behind the client.
So we cut all the hair of the temporal zones using the method strand by strand to the sagittal parting.
We cut the occipital part of the hair, starting from the central zone. The control strand is on the sagittal parting.
Let me remind you once again that all simple men's haircuts are performed using the strand by strand method with a hair pull of 90 °.
We also cut the lateral occipital zones.
Comb all the hair of the occipital zone down.
We carry out the edging of the hair at the back of the head. Combing your hair, try to press the hair as tightly as possible to the neck.
If your hair is dry, dampen your hair. The edging of the back of the head can be oval, have the shape of a trapezoid with straight or rounded edges. The edging line should not be higher than the marginal hairline.
To improve the quality of the edging, do not be lazy, comb your hair several times, each time checking the evenness of the line and adjusting the edging line if necessary.
The edging line behind the ears runs almost at the very base of the ear. Before reaching the lobe, it connects to the edging of the back of the head. The temple is straight.
Now comb all the hair of the parietal zone forward. Finish the bangs. The fringing of the bangs should be straight. You will cut off about 0.5 cm, but no more. Now round it a little to the frontal depressions, connect the fringing line of the bangs with the temples.
I advise you to comb the hair at the temples many times and in different directions, checking and removing excess hairs. After such a check, the edging line will become perfect, and a simple men's haircut will look high quality.

HAIRDRESSER'S ADVICE
Test for a new comb: run the teeth across the palm of your hand. If you get scratched, your hair will feel the same way.
Good brushes have mixed bristles, it consists of natural and artificial components.
These brushes are perfect for the 100-time nightly combing that the pros continue to recommend.

Control strand of hair in the parietal zone of the face 3-4 cm long

For the middle occipital zone, the control strand of hair is on the sagittal parting
Down on the whiskey

We cut the lateral occipital zones, like the middle zone of the hair, using the strand by strand method

Headband straight

The fringing of the bangs is done with a straight cut, the fringing line of the bangs is slightly rounded towards the frontal depressions

Men's haircut done with a hair clipper.

Hair: short, preferably coarse.
Tools for men's haircuts: machine, thinning scissors.
Skill Level: Beginner.

Men's hair cutting with a clipper requires skill, so when you first try cutting it, it's best to leave your hair longer.
Cut your hair with free, slow motions.
Trim a small amount of hair first.
Comb your hair more often when cutting.
Performing a male haircut with a hair clipper
Perform this men's haircut on dry hair. Using the largest nozzle, we cut the hair of the parietal zone, dropping slightly to the temples.
To do this, comb the hair according to growth, and insert the machine into the hair against hair growth. We make many movements with a hair clipper, we drive the machine along the head, pressing it to the surface, but we do not change the angle with the surface of the head.
How many times we comb our hair and run it with a machine will depend on how neatly and efficiently the men's haircut will be done: the more, the better.
Now we cut the back of the head. For cutting the back of the head, we use a smaller nozzle, about twice (that is, if the crown was cut with a nozzle of 12 mm, then the back of the head is 6 mm or 9 mm). Starting the haircut from the bottom, we drive the machine up, and if at first the machine is tightly pressed to the head, then at the crown of the head the machine comes off the head, leveling the difference between the length of the hair.
Using the same nozzle, we cut the whiskey, while combing the hair in different directions.
And now the hardest part. Remove the nozzle from the machine. Your task is to make a smooth transition from the parietal zone “to nothing”. Using a machine, we make a smooth transition from short hairs at the edging line to the hair cut before.
We carry out the edging of the temples, behind the ears and neck with a machine without a nozzle.
With simple scissors, we check the length of the hair over the entire head.
With thinning scissors on the comb, we eliminate all inaccuracies and irregularities in the men's haircut.

HAIRDRESSER'S ADVICE
The most important and most problematic part of the machine is the knife. The knife in the hair clipper consists of two parts: movable and fixed.
Knives get dull over time. It is recommended to sharpen the knife at least once every two years, without waiting until the knife is completely dull and it will have to be replaced with a new one.

We start cutting the crown of the head from the face, using the largest nozzle

We perform the edging of the back of the head with a machine without a nozzle

Haircut of the back of the head and temples is performed with a machine with a smaller nozzle

Short men's haircut on a comb.

Hair when cut on a comb: thick, medium thickness.
Tools for performing men's haircuts on a comb: straight scissors, comb.
Skill Level: Beginner.

If your client asks for a very short men's haircut and you don't have a clipper, this haircut is exactly what you need.
The whole haircut can be done with only straight scissors and a classic comb.
It is better if the client's hair is thick and not thin, and that he has recently worn the same short haircut.
Performing a male haircut on a comb
Depending on the thickness of the hair, this men's haircut can be done on dry or damp hair.
Dry hair is more comfortable to cut, but dry hair blunts scissors and it is difficult to create a smooth transition on the hair. Our advice, with a strong hair density, start the haircut on dry or slightly damp hair, and at the end of the haircut, moisten the hair and do a check.
We start this men's haircut on a comb by combing all the hair according to their natural growth.
We cut the parietal zone, moving from the face to the back of the head on the comb. We introduce the comb into the hair against growth, cut off the hair directly above the teeth.
The back of the head is cut from the bottom up. So that there is no “ladder”, we comb the hair at a slight angle and do a check, removing all the extra hairs sticking out above the comb.
It is best to check in crossing directions at the back of the head. To do this, we first lead from the left side of the edging line towards the right temple at an angle, and then vice versa - from the right to the left temple. Only loose hairs need to be trimmed.
Let's move on to cutting the temples. We cut whiskey from the bottom up, then from the face. Often on the temple, closer to the crown of the head, in men, the hair grows from the face and slightly down. Remember that we always insert the comb against growth and cut the hair above the butt.
We check the area between the temple and the crown, moving from the bottom up (as when cutting the temples) and from the face (as when cutting the crown).
Create a border line. The temple is straight. We remove everything that sticks out behind the ear. The edging of the back of the head is soft, with rounded corners. We remove all hair below the edging with a razor. If there is no razor, then with the tips of scissors, but in any case, be very careful not to injure the client. For the edging line in this men's haircut, the natural hair growth should be the guideline.
If, in addition to straight scissors, you have thinning scissors, great. Wherever a barely noticeable “ladder” has turned out, process the ends of the hair with thinning scissors.
This men's haircut on a comb emphasizes the natural beauty of a man - the features of the shape of the skull, facial features, ears, texture of the hair and the marginal line of their growth. That is why such a men's haircut requires careful execution.

We cut the parietal zone from the face to the back of the head
The back of the head is cut from the bottom up

Let's move on to cutting the temples

Create a border line

Classic men's haircut.

Hair when performing a classic men's haircut: any.
Tools for performing a classic men's haircut: straight scissors.

This men's hairstyle is classified as a classic style.
Strands of hair of moderate length are laid away from the face, the temple is open straight. This style is loved by many men of any age.
There are a lot of options for haircuts for men in a classic style. Perhaps, after studying a few, you will come up with your own haircut technique.
And this option, a classic male haircut, in our opinion, is the easiest to perform.
Performing a classic men's haircut
Before starting a classic men's haircut, divide clean, damp hair into zones.
We start the classic men's haircut from the right temporal zone. Parallel to the marginal hairline, we select a strand of hair with a diagonal parting, first we comb it on the face and cut off the corner of the temple to the face. We comb down and perform the edging of the temple. The temple must be straight.
With a horizontal parting, we select a strand of hair at the temple, pull it off at an angle of 90 ° and cut it with a straight cut. So in a row, highlighting the strands with horizontal partings, we cut all the strands of the temporal zones, first from the right, and then from the left side.
Next, we cut the hair strands of the upper, and then the lower occipital zones by removing the hair on the fingers.
The reference point will be the freshly cut strands of hair in the temporal zones.
We cut the occipital zone from right to left from ear to ear so that each subsequent strand is perpendicular to the head and equal to the previous one.
We also cut the lower occipital area with vertical partings, with a 90 ° brace, cut the strand at an angle of 45 °.
We carry out the edging of the hair of the lower occipital zone and behind the ears.

HAIRDRESSER'S ADVICE
Brushes, as a rule, are more elastic than combs, brushes harm the hair less and gently massage the scalp.
To clean hair off a quality mixed bristle brush, don't scrape it with a comb - better rub two brushes together or buy special "rakes" at the hairdressing supply store just for this purpose.

HAIRDRESSER'S ADVICE
Combs and brushes should be washed regularly with lukewarm water and shampoo. Brushes with wooden handles or rubber bases must not be kept in water during cleaning. After rinsing thoroughly, lay the brushes to dry on a towel, bristles down.

With a diagonal parting, we select a strand of hair, comb the strand to the face and perform the edging of the temple

With a horizontal parting, we select a strand of hair at the temple and cut with a straight cut
The reference point for the upper occipital zone is the freshly cut strands of hair of the temporal zones.

Symmetry control in the classic men's haircut in front

Control strand of hair for the parietal zone at the temple

Unifying haircut between the crown and temporal zones

Men's polka haircut.

Hair when performing a male haircut "Polka": any.
Tools for haircut "Polka": straight scissors.
Skill Level: Beginner.

This men's Polka haircut is made in a classic style.
A feature of the Polka haircut is the volume at the temples.
When styling, all hair is usually combed back.
“None” we cut only the lower occipital zone of the hair.
The edging line of the temples is dense.
Hair on the crown and temples of the same length.
Men's Polka haircut is good for older men or those who have noticeably less hair on the temples than on the crown.
Performing a male haircut "Polka"
We cut the strands of the parietal zone by removing the hair on the fingers
To do this, we select a strand of hair parallel to the edge line of hair growth near the forehead with a horizontal parting, comb out the strand perpendicular to the head and with a haircut, leaving a length of about 3 cm. Parallel to this strand, select the next one, comb it out together with the previous one perpendicular to the head and cut it at the level of the previous strand.
So in a row, highlighting the strands of hair with horizontal partings and combing them perpendicular to the head, cut the entire mass of the hair of the parietal zone at the level of the previous strand, first the middle part of the parietal zone, and then the side parts.
Separate the upper occipital area of ​​the hair from the lower with a horizontal parting. We cut the mass of hair of the lower occipital zone with the method of removing “to nothing”.
Strands of hair of the temporal-lateral zones on the right, and then on the left side, cut the hair removal on the fingers with the technique. To do this, parallel to the marginal hairline of the temporal-lateral zone, we select a strand of hair with a vertical parting and comb it out on the face, we perform edging, focusing on the length of the strands of the parietal zone. In parallel with this strand, we select the next one, comb it out together with the previous one and cut it at the level of the previous strand. So in a row, highlighting the strands with vertical partings and combing them out together with the previous one perpendicular to the head, we cut the entire mass of hair of the temporal-lateral zones at the level of the previous strand.
Strands of hair of the upper occipital zone with a haircut by removing hair on the fingers, focusing on the length of the strands of the parietal zone and temporal-lateral zones.
Moreover, we cut hair strands in rows.
The final stage of the male haircut "Polka" is the edging of the haircut.
We trim the hair with straight scissors, after wetting the hair or combing it with a wet comb.

Control strand of facial hair 3 cm long

We reduce the lower occipital area of ​​the hair "to nothing"

We select a strand of hair at the temple, comb out the strand on the face and perform the edging
Haircut of the temporal zones is performed by the method of hair removal on the fingers, focusing on the parietal zone

Strands of hair of the upper occipital zone with a shearing technique removing hair on the fingers

Men's haircut "semi-box".

Hair when performing a half-box haircut: any.
Tools for performing men's haircuts half-box: straight scissors, hair clipper.
Skill level: the ability to cut with a machine without a nozzle.

The essence of the half-box haircut method is that the haircut of a part of the temporal-lateral zones and a part of the occipital zone is performed by reducing the hair “to nothing”, and the haircut of the parietal zone is performed by removing the hair on the fingers. The half-box men's haircut has two edgings: one edging - along the marginal hairline, the other edging - along the upper edge of the hair reduction "to nothing" at the temples and the back of the head.
Performing a male half-box haircut
We begin to cut the half-box haircut from the center of the occipital zone, first to one side, then to the other side, strip by strip, using the method of nulling out with a hair clipper or a razor.
If you work with a machine, then the hair may be dry, when using a razor, the hair must be moistened with water.
The upper border of the treated area runs along the line of the upper point of the auricles and the occipital protuberance (it is somewhat lowered towards the center).
If you're not sure you can make a straight line with a typewriter, use scissors first.
At the temples, we cut the hair, taking into account the level of the previously trimmed occipital zone.
After that, we make a fringing of hair on the neck, temples, behind the auricle.
In order for the transition from short hair to long hair to be softer, you should perform a very smooth shading of the hair 2-3 cm above the control line. In this case, you can use straight and thinning scissors, a razor.
Then we cut the hair of the parietal zone on the fingers and lightly mill the hair.
During cutting, shading, thinning, it is necessary to work on the shape of the half-box hairstyle, trying to veil all the flaws in appearance and, if possible, give the half-box hairstyle the correct oval shape.

We cut the back of the head with a machine “to nothing”, creating a edging line

We produce a smooth shading of the hair of the control line
We cut whiskey, focusing on the trimmed back of the head

The hair of the parietal zone is cut on the fingers, moving away from the face

Men's haircut "boxing".

Hair when performing a male haircut boxing: any.
Tools for performing male haircut boxing: straight scissors, hair clipper.
Skill level: ability to operate a hair clipper without a nozzle.

The box haircut, unlike the half-box haircut, has shorter hair, and the border of the hair edging runs above the occiput.
In a boxing haircut, the border of the hair edging can be at different heights and have a different shape (taking into account the shape of the head and hair growth).
This haircut is preferred by young people with the correct head shape.
A neater men's boxing haircut will look on not too black hair.
Performing a male haircut boxing
We outline with straight scissors the border of the transition from long to short hair.
If the temples are very sunken, the hair edging line can be made lower, but if the temples are rather convex, the hair edging can be raised higher. If the back of the head is very convex, then the edging of the hair should pass under it.
All hair up to this line is reduced to nothing with a hair clipper.
We perform edging of hair over the entire head with a typewriter or razor.
We cut the hair of the parietal zone on the fingers using the strand by strand method.
Then we carefully shade the hair of the edging line (with thinning scissors, a razor).
The width of the hair shading strip can be different and depends on the color of the hair. With dark hair, the shading of the hair should be wider than with light hair.
Work the hair near the face with a jagged cut, comb the hair on the face and cut off all the protruding hairs with the tips of the scissors.

We cut the back of the head with a hair clipper “to no” to the control line

We cut the parietal zone using the strand by strand method, the control strand is near the face

Men's bob haircut or "platform".

Hair when performing a male haircut or "platform": not thin, the hair should keep its shape well.
Tools for performing a male haircut or "platform": straight scissors, hair dryer, comb.
Skill level: self-confidence, good command of cutting techniques.

The most difficult stage in the implementation of this male haircut is the design of the so-called "platform",
which is located on the site from the forehead line to the top of the head and has a strictly horizontal surface.
Creating a perfectly flat horizontal line of the "platform" requires special care.
When cutting, the hair should be in a strictly vertical position, and the better the hair will be pulled,
the better the men's haircut will be. The comb and scissors are kept in a strictly horizontal position,
and the scissors, parallel to the comb, move along with it, not behind or ahead of it, in order to prevent marriage in the haircut.
Performing a male bob haircut or "platform"
Before cutting, moisten the hair with a fixative, give the hair a vertical position and style with a hairdryer, trying to maintain the resulting shape.
If the length of the hair exceeds 5 cm, it is necessary to pre-cut, leaving the length of the hair about 5 cm, as long hair cannot be fixed in a vertical position.
We start the haircut from the side zones.
When cutting, the hair should be pulled away from the head so that the hair is perpendicular to the intended "platform". We move from the face to the back of the head, strictly observing this position of the comb and scissors. So we cut the upper occipital and temporal zones.
We reduce all the hair of the lower zones to nothing, while you can use scissors or a hair clipper.
Let's move on to the formation of the "platform". We outline the height of the “platform” near the face, highlighting a strand of hair with a horizontal parting.
Similarly, we determine the height of the "platform" at the top.
We connect the trimmed strands with a vertical parting and get a control strand.
After that, we cut all the hair of the parietal zone with horizontal partings, focusing on the control strand.
We carry out the edging of the haircut all over the head. The temple is straight.
In this men's haircut, the edging line should be clear.

HAIRDRESSER'S ADVICE
Almost any hair can be put in the desired hairstyle, but in everyday life the main thing is how the hair will lie without styling.
For all voluminous haircuts (Kare, Beaver, Hedgehog, etc.), hair with a sufficiently large growth angle is needed.
Such hair, as it were, themselves show the master that these haircuts are for them.
To get the perfect "platform" it is better if the hair is not only raised, but also thick.
Most likely, it was thanks to this hair structure that these haircuts appeared.

Blow-dry your hair upright
Side zones of hair with a haircut on a comb

We outline the height of the "platform" at the forehead

Men's haircut "beaver".

Hair when performing a male haircut "beaver": should keep its shape well.
Tools for performing a male haircut "beaver": straight scissors, comb.
Skill level: self-confidence, mastery of basic haircut techniques.

This male haircut "beaver" resembles a bob haircut, but at the temples the hair is not strictly perpendicular to the "platform" on the crown,
and the angle between the temples and the "platform" is slightly rounded.
This haircut looks less contrasting and therefore more like men. It is easier to perform such a haircut, but accuracy and work skills are required.
If you doubt yourself, do the haircut gradually, do not remove the hair immediately to the required length - it will be easier to achieve the desired result.
Performing a male haircut "beaver"
We start the beaver haircut from the upper occipital zone. We cut the hair from the center to the temples with vertical partings on the fingers.
The fingers should be perpendicular to the intended area, and the fingertips should touch the head.
We reduce the lower occipital zone “to nothing” with a hair clipper.
Then we cut the hair of the parietal zone, that is, we create a “platform”. When starting to form a "platform", one should take into account the wishes of the client regarding the height of the "platform", however, according to the general rule, with a wide face, the hair on the "platform" should be left longer, and with a thin one - shorter.
It is very important when cutting the "platform" to correctly set its level. To do this, cut a strip from the frontal protrusion in the middle of the parietal zone to the top of the head. This strand will be a guideline when creating a "platform".
The length of the hair at the forehead should be approximately 3-5 cm, and towards the top of the hair, the length of the hair is gradually shortened. On the border with the occipital zone (cut earlier), we reduce the hair to nothing. In order for the "platform" to have a perfectly flat surface, it is necessary to move the comb so that the hair under it continues to remain in a strictly vertical direction. Cutting the hair of the side zones, comb the hair from the bottom up.
The hair of the side zones during the haircut should be pulled perpendicular to the "platform". When cutting the left side, the scissors are located with the ends down, and when cutting the right side, the ends are up.
Now we soften the angle between the "platform" and the temples. This can be done with both simple serrated scissors and thinning scissors, but the cut will be straight. Regardless of the tool, shearing, lifting the hair on the comb.
To get a good quality haircut, repeat these movements several times on each strand.
We carry out the edging of the haircut over the entire head with the tips of the scissors. For best results, wet your hair along the edging line.

We cut the upper occipital area of ​​the hair with vertical partings on the fingers
We set the level of the "platform" with a vertical parting in the center of the parietal zone

We cut whiskey on a comb

We soften the angle between the "platform" and the temples

Men's hedgehog haircut.

Hair when performing a male hedgehog haircut: not thin.
Tools for performing a male haircut "hedgehog": straight scissors, comb.
Skill level: mastery of basic haircut techniques.

The Hedgehog haircut is similar to the Beaver haircut, but differs from it in an oval shape.
If the hair is left shorter, then a successful interpretation of a short haircut is obtained - simple and natural.
Successful options for this men's Hedgehog haircut allow you to create various types of hair thinning.
As a rule, such a haircut is performed on hair with a large angle of growth.
Performing a male haircut "Hedgehog"
First, we cut the hair of the occipital zone to the crown and the temporal zone to the temporal protrusions (taking into account possible head defects).
If necessary, you can finish cutting the back of the head 1 cm below the crown.
Haircut of the temples and the back of the head can be done with straight scissors on a comb or with a hair clipper.
When cutting the hair of the parietal zone, one should try not to cut the hair on the “platform” below the level of the already trimmed hair at the crown. Therefore, it is better to cut hair with a small margin of length, which is then easily shaded. To obtain an oval shape, the edges of the "platform" are slightly rounded.
To make the Hedgehog haircut look like a hedgehog, the entire parietal zone can be worked out with thinning scissors.
The “Hedgehog” haircut will be perceived in a completely different way if you work out the ends of the hair with a serrated cut or pointing method.
For styling the “Hedgehog” hairstyle, you can use a small amount of foam, while you can not dry your hair with a hairdryer.
Squeeze the foam into the palm of your left hand, dip the fingers of your right hand in it, insert your fingers into the hair and rise from the roots to the ends.

We cut the upper occipital zone with vertical partings on the fingers

Round the edges of the "platform" to obtain an oval shape

Men's haircut "Voyage".

Hair when performing a haircut "voyage": any.
Tools for cutting "voyage": straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircut techniques.

A characteristic feature of the “voyage” haircut is a visible clear line separating the lush volume of the hair strands of the parietal zone and the strands taken “to nothing” in the lower occipital and temporal-lateral zones. Apparently, due to this characteristic feature, this haircut, as well as haircuts made on the basis of Voyage, are often called a “hat”.
Performing a male haircut "voyage"
Draw a randomly horizontal parting from one temple to another, at the back of the head the parting should go lower than at the temples.
Gather the strands above the parting into a bun and secure with a hair clip.
In the lower occipital area, parallel to the horizontal parting, select a strand of hair and cut off the strand on your fingers, leaving a length of 1-1.5 cm.
The haircut of the strand must be done, observing the direction of the haircut from the temple to the middle of the occipital zone.
This strand of hair will be the control for the temples and the back of the head.
Further, by taking the hair “to nothing”, we cut the strands of the temporal zones and the lower occipital zone, that is, we carry out a smooth transition from the marginal hairline of the temporal and lower occipital zones to the control strand.
At this stage of the haircut, you can trim the hair.
It is better if the edging line is soft, since the voyage haircut itself looks more romantic than strict.
In parallel to the control strand in the upper occipital area, we select the next strand, comb it out together with the control strand and a shear at the level of the control strand with an elongation of 1.5-2 mm.
So in a row we cut the entire parietal zone of the head.
Next, we comb out all the strands of the parietal zone according to hair growth and perform the edging.
We check the clarity of the “voyage” haircut, combing out the strands arbitrarily and eliminating visible differences in the lengths of adjacent strands.
We make light thinning of the parietal zone with a thinning razor, highlighting the strands with vertical partings.
We cut the ends of the strands of the parietal zone with thinning scissors, highlighting the strands with vertical partings.
Styling strands of hair in a hairstyle should be done, focusing on a clear line that highlights the parietal zone.
The originality and romance of the “voyage” haircut can be emphasized by highlighting a few strands with wax.

Below the parting, select a strand and cut it at a distance of 1-1.5 cm
We carry out a smooth transition from the marginal hairline to the control strand

Parallel to the control strand of hair, select the next strand and cut the hair with an elongation of 1.5-2 mm

Thinning the hair of the parietal zone with a thinning razor

Men's haircut "Favorite".

Hair when performing a haircut "favorite": any.
Tools for cutting "favorite": straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircut techniques.

Another haircut technique, the characteristic feature of which is a visible clear horizontal line,
separating the lush volume of the parietal zone and short-cropped strands by the method of nullifying the temporal and lower occipital zones.
Unlike the Voyage haircut, this line will be lighter due to the modified haircut technology.
Performing a male haircut "favorite"
Draw a horizontal parting at the level of the top of the ear through the occiput.
Strands of hair in the lower occipital zone with a shear by the method of reducing to nothing.
First, we cut the hair strands of the lower occipital zone, then the strands of the temporal zones.
Arbitrarily, during the shearing process, we determine the line of the control strand, the length of the control strand is also determined during the shearing process.
We separate the hair of the parietal zone with a vertical parting from the middle of the forehead through the top of the head to the control strand.
We continue cutting hair in the upper occipital area.
In parallel with the control strand of hair, select the next strand of hair and comb out to the control strand. We cut it at the level of the control strand with an extension of 1-2 mm. So in a row, highlighting the strands with horizontal partings, cut to a vertical parting, so that each subsequent strand is 1 mm longer than the previous one.
We check the clarity of the haircut along the vertical parting. To do this, comb out the strands to the right and left of it and align the length of the strands: the strands should be equal in length.
We comb out the strands according to hair growth and perform the edging of the hair strands in the parietal zone. We carry out the edging of the back of the head and temples. The edging of the hair should be soft and rounded, like the “favorite” haircut itself.

HAIRDRESSER'S ADVICE
The guy during the haircut allows you to change the length of the strands.
Having outlined the control strand and the direction of the haircut, you can begin to correct the length.
If you pull the strands in the direction of the haircut, they will become shorter.
If you pull the strands in the direction opposite to the direction of the haircut, then the subsequent strands will become longer.
The draw angle of the strands will determine the extent of these changes.

We reduce all hair from the parting to the edging on the neck and temples
A strand of hair above the parting - at the level of the control strand

Unifying haircut

We carry out the fringing of the hair on the back of the head

Men's haircut "Brig".

Hair when performing a brig haircut: any.
Tools for haircut "brig": straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircut techniques.

Men's haircut "Brig" is performed on the basis of the "Voyage" haircut and is a haircut, the distinguishing feature of which is a lush volume of hair in the parietal zone (stepped haircut) and strands of hair removed "to nothing" in the lower occipital and temporal zones.
Performing a male haircut "brig"
Wash the client's head and lightly towel dry before cutting the brig.
Draw a horizontal parting randomly at the level of the top of the ear. Clip the hair above the parting so that the hair does not interfere.
Parallel to the horizontal parting, drawn arbitrarily, we select a strand of hair below the parting and with a haircut, leaving a length of 1-1.5 cm.
We make a haircut, observing the direction of the haircut: from the face to the middle of the occipital zone on one side and on the other.
Next, by taking the hair “to nothing”, we cut the entire mass of the hair of the lower occipital zone and part of the temporal zones below the horizontal parting. That is, we carry out a smooth transition from the marginal hairline to the control strand.
Next, cut the strands of hair in the upper occipital area.
In parallel with the horizontal parting, we select a strand of hair, comb this strand to the control strand and cut it at the level of the control strand with an elongation of 1-2 mm.
When doing this, do not forget to follow the direction of the haircut.
So in a row, highlighting the strands with horizontal partings, we cut the entire mass of hair of the parietal zone to a vertical parting, passing from the middle of the forehead to the middle of the neck.
In parallel to the vertical parting from the middle of the forehead to the top of the head, we select a strand, comb it out perpendicular to the head and cut it arbitrarily.
We will consider this strand of hair as a control.
Focusing on its length, we cut a strand near the face. We comb the strand perpendicular to the head.
In parallel with this strand, we select the next one, comb it out and cut it at the level of the control strand.
So in a row, highlighting the strands with horizontal partings, we cut the entire mass of hair in the parietal zone. In addition, each subsequent strand should be perpendicular to the head.
Next, we comb out the strands of hair of the frontal zone on the face and perform the edging.
If the client wears bangs and the bangs are too long, cut a small strand to the desired length, and then, highlighting the strands with vertical parting, eliminate the resulting length difference.
We check the clarity of the brig haircut, combing the strands arbitrarily in different directions and eliminating possible differences in the lengths of adjacent strands of hair with a thinning razor.
We cut the ends of the hair strands of the parietal zone with thinning scissors.

Control strand of hair below the parting, 1-1.5 cm long

We carry out a smooth transition from the edge line to the control strand of hair

We select a strand of hair above the parting and cut it at the control level with an elongation of 1-2 mm
Control strand of hair for the top of the head on a vertical parting

Select a strand near the face and cut it off at the level of the just cut

We comb out all the hair on the face and perform the edging

We carry out the thinning of the ends of the hair strands with thinning scissors

Men's haircut for sparse thick hair.

Hair when cutting for sparse thick hair: sparse, of sufficient thickness.
Tools for haircuts on sparse thick hair: straight scissors, comb, hair dryer, thinning scissors.
Skill level: mastery of basic haircut techniques.

A haircut for sparse thick hair is performed in such a way as to reduce the volume of hair in the lateral zones and at the back of the head, while maintaining the length of the hair of the upper layer, the softness of the line of which is achieved by thinning the hair with thinning scissors.
This haircut can be done on any hair.
A feature of the technique in cutting for sparse thick hair is that the hair must be styled with a hair dryer before cutting.
Performing a male haircut for sparse thick hair
Before starting the haircut, wash the client's head and dry the hair of the parietal zone, lifting it at the roots on the fingers.
In order for the hair to rise at the roots, you will have to use your hands in such movements as you would if you were working with a hair styling brush.
The hair dryer should be aimed at the roots of the hair, but casually so as not to burn the scalp.
Improper drying of hair will not give the desired effect.
When drying hair, first hold the hair dryer in your right hand and then in your left.
Select a strand of hair near the face and determine the length of the strand.
Next, using the strand by strand method, we cut the parietal zone on the comb with thinning scissors.
We cut the lower temporal and occipital zones with simple scissors with vertical partings with a 90° guy line, cut at an angle of 45°.
Now you can trim the hair at the temples and the back of the head.
We cut the hair of the upper temporal zones and the upper occipital zone with thinning scissors, taking the hair with wide vertical partings.
Our task is to connect the lower zones of the hair with the parietal.
In the parietal zone, we perform hair thinning (we cut the hair to half the main length), and if we cut the parietal zone with vertical partings, then now we select the hair strands with horizontal partings.

HAIRDRESSER'S ADVICE
Strand by strand on a comb with thinning scissors
We select a strand, raise the hair with a comb, insert thinning scissors into the strand below the level of the intended cut and begin to perform frequent movements, moving up the strand and gradually accelerating the rate of closing of the scissors.

Blow-dry the client's hair at the roots on the fingers

We carry out the edging of the hair of the back of the head and behind the ears
Select a strand of hair near the face and determine its length

We perform a unifying haircut with thinning scissors

We cut the hair strands of the lower occipital zone at an angle of 45 °

We perform hair thinning of the crown of the head for half the length

Men's haircut "Sagittarius".

Hair when performing a Sagittarius haircut: any.
Tools for haircut "Sagittarius": straight scissors, thinning scissors.
Skill level: self-confidence, mastery of basic techniques.

A characteristic feature of the male Sagittarius haircut is the presence of a high side parting with an elongated bang.
The temple is open, the temple is edging with a “corner”.
Styling the Sagittarius haircut is good to do with wax, creating strands, or after drying, comb the hair with a comb.
It is recommended to give the haircut volume and highlights to highlight the hair on the cap.
Performing a male haircut "Sagittarius"
We start the Sagittarius haircut from the right temporal-lateral zone.
Parallel to the marginal line of hair growth, we select a strand with a horizontal parting, comb it along the hair growth and perform a “corner” edging.
In parallel to this strand, we select the next one, comb it to the previous one and cut it at the level of the previous one with a 45 ° brace. So in a row, highlighting strands of hair with horizontal partings, we cut the entire temporal zone on the right side.
Then, similarly, we cut the temporal zone on the left side.
Parallel to the marginal hairline in the temporal zone on the right side, we select a strand with a vertical parting, comb the strand on the face and perform the edging.
With a vertical parting, we select the trimmed hair at the temple near the occipital zone, comb the hair that has not yet been cut from the occipital zone to it, pull it slightly towards the face and cut it off at the level of the already trimmed ones.
So using the strand by strand method, highlighting the strands with vertical partings, we cut all the hair of the temporal-lateral zone and the upper occipital zone to the middle of the occipital zone.
In the process of cutting, pay attention to the increase in the length of the strands towards the middle of the occipital zone. Similarly, we cut all the strands on the left side.
Further, in the lower occipital zone, we perform a preliminary edging with a bracket and, by removing the hair on the fingers, we cut all the strands of hair.
That is, parallel to the marginal line of hair growth in the lower occipital zone on the right side, we select a strand with a vertical parting, comb it out together with a part of the strand of the upper occipital zone and a shear, focusing on the length of the strands of the upper occipital zone and the length of the edging strands.
In parallel with this strand, we select the next one, comb it out together with the previous one and cut it at the level of the previous one at an angle of 90 °.
So in a row, highlighting the strands with vertical partings, we cut all the hair of the lower occipital zone with a slight pull to the face.
We carry out the edging of the hair behind the ear, repeating the hairline.
Next, highlighting the strands of hair with diagonal parting, we perform a test haircut of the strands of the occipital zone on the right side of the vertical parting.
In this case, the direction of the haircut is from the ear to the crown.
Similarly, we cut the strands of hair on the left side of the parting.
We make the final edging in the lower occipital area.
We cut hair in the parietal zone.
To do this, parallel to the side parting that separates the parietal and temporal zones, in the temporal zone we select a strand, comb it out perpendicular to the head and trim it.
In parallel to this strand in the parietal zone, we select a strand and comb it out to the previous strand, cut it at its level, while the strand of the temporal zone is perpendicular to the head. So in a row, highlighting the strands with vertical partings and combing them tangentially to the head, we cut all the hair of the parietal zone.
We cut, combing out all the strands of the parietal zone, first to the right, and then to the left.
We carry out the edging of the hair of the parietal zone.
To do this, we comb out all the strands of the parietal zone on the face and perform a “corner” edging, connecting the strands of the temporal zones and the parietal zone.
We cut the ends of the hair with thinning scissors.

At the temple, we perform the edging of the hair with a “corner”

We perform a haircut of the temples, focusing on the control strand, with a guy line of 45 °
Control strand of hair for the occipital area at the temple

We carry out a preliminary edging of the hair with a bracket on the fingers

We perform a test haircut with diagonal partings

We cut the hair of the parietal zone with vertical partings

We perform edging of the hair of the parietal zone with a “corner”

Men's haircut "Curl".

Hair when performing a haircut "curl": any.
Tools for haircuts "curl": straight scissors, comb, thinning scissors.

The “curl” haircut is characterized by the absence of clear lines, soft transitions to the occipital area and side strands, turning into graceful strands descending onto the face.
Above the forehead, the hair of the frontal zone forms a slightly outlined vertical curl.
The thinning technique for the parietal zone can be used in other haircuts. At the back of the head, the angle of the “cap” can be made soft or sharp.
Thin tanks will look good.
Performing a male haircut "curl"
We carry out the edging of the hair at the back of the head. It is better if the edging turns out sharp.
Haircut "curl" youth, and preference in its implementation is given to all sorts of new trends in the haircut.
The temple can be pointed and long. Thin tanks will look good.
We select a horizontal parting, from ear to ear at an angle with the top at the height of the cervical vertebra and cut the hair of the lower occipital zone very shortly with scissors over the comb.
We part the hair from the middle of the occipital zone to the temple, observing the angle at the back of the head.
We cut the hair with vertical partings at an angle of 45 °, focusing on the trimmed lower zone.
With a parting parallel to the edge of the trimmed zone, select a strand of hair from one temple to another and cut it to the desired length.
At the temples, hair should at least cover the earlobes. At the back of the head we observe the angle.
We comb the hair of the crown of the head according to growth and perform the edging of the hair at the level of the freshly cut.
Thinning scissors cut the hair of the parietal zone. Select the control strand near the face, set the length and move to the back of the head.
We cut the parietal zone using the strand by strand method.
We carry out the graduation of the hair on the crown, while highlighting the strands perpendicular to those that were just highlighted.
We do the graduation of the hair at an angle, while the angle should point towards the face.
At the back of the head, the parting should come out of the point at the crown, and the angle should point away from the crown.

The hair below the parting with a haircut is very short over the comb

Haircut of the parietal zone of hair is performed with horizontal partings with thinning scissors

Set the length of the control strand of hair above the parting
We perform hair thinning at the back of the head

We make hair thinning on the crown of the head by parting in several places

We carry out the fringing of the bangs with a sliding cut

Asymmetrical men's haircut with parting.

Hair when performing an asymmetric haircut: medium density and medium softness.
Tools for performing an asymmetrical haircut: straight scissors, comb, razor.
Skill level: ability to work with a razor.

Asymmetric haircut with a parting is recommended for young and middle-aged men with any hair structure, except for thin ones.
An asymmetrical haircut is performed on clean, damp hair, mostly with a razor.
You will need some skills in the work.
The technique of asymmetric haircuts is that under the mass of hair of the parietal zone on the opposite side of the parting with a razor, a basis for hair volume is created.
Performing an asymmetrical haircut with a parting
With parallel partings, we separate the parietal zone of the hair from the temporal zones.
We start an asymmetrical haircut at the temples.
With vertical partings parallel to the hairline, we separate the strands on the right and left temples and cut them with a razor with a guy line on the face.
These strands of hair will be the control.
We cut the subsequent strands to the middle of the back of the head using the strand by strand method with a brace to the face. Using the same method, we mill the lower part of the occipital zone.
To do this, first on the right, and then on the left in the lower occipital area at the temple, we select a strand of hair with a vertical parting next to the edging line and cut it off with a razor, simultaneously milling along the entire length.
So we cut the entire lower zone to the central vertical parting on one side, and then on the other side.
We carry out the edging of the temples and the back of the head with straight scissors with a serrated cut.
Along the natural parting line, we select a strand of hair 2 cm wide and cut it with scissors in the form of a “fringe” 3-4 cm long.
With the help of a razor, we blend the hair first to the temple, and then from the side of the crown to remove a sharp transition in length, focusing on the previously trimmed hair of the temporal zone on the opposite side of the cut parting and on the left length at the parting.
We perform a connecting haircut of the crown to the sagittal parting. We make a haircut with straight scissors with a serrated cut.
We continue the unifying haircut in a circle, until the cut parting.
On the parting, on the back of the head, we shade the hair with a razor.
To do this, select 2-3 horizontal partings with a thickness of 1.5-2 cm.
Hair styling with a hairdryer is done without parting.
The hair above the forehead is styled asymmetrically.

We select strands of hair at the temples, comb it on the face and cut it off with a razor

We perform a unifying haircut of the opposite temple
A strand of hair 2 cm wide with a fringe-shaped haircut 3-4 cm long with a sliding cut

We shade the hair to the temple with a sliding cut

We shade the hair to the crown

At the back of the head, we shade the hair with a razor

Men's haircut using a unique technology.

Hair when cutting: soft, not liquid.
Cutting tools: straight scissors, comb, thinning scissors.
Skill level: excellent command of cutting techniques.

When performing this hairstyle, special attention should be paid to the haircut technique. Thanks to a professionally cut haircut (the appearance of the hairstyle has a triangular and asymmetrical shape), the hair lies freely, enlivening the face and giving it originality.
The hair on the back of the head is quite short, but retains its volume.
Performing men's hair cutting using a unique technology
Wash the client's hair before starting the haircut. Starting from a point in the center of the crown, divide the hair into six sections, which are six sharp triangles.
These sections of hair are distributed as follows: one - in front of the head, two - on the sides and three - at the back of the head.
For convenience, the hair of these areas can be stabbed. If the hair is damp enough, it is enough to comb it properly.
We start cutting in the center of the back of the head in the direction from the bottom up to the point of distribution of the strands.
To do this, along the edge of hair growth at the back of the head, select a strand 1-1.5 cm wide and cut it off. The length of this strand of hair is no more than 2 cm.
Above the trimmed strand, select the next one, comb the strands of hair together and cut off. Strand pull 60°, cut the entire area using the strand by strand method. You should cut your hair by holding a strand of hair between your fingers and pulling it tightly.
We continue cutting the hair on the back of the head according to the same principle.
In the same way, we cut the sections of hair above the ears.
Align the strands of hair with the previous ones, keeping them perpendicular to the scalp.
Then we cut the connecting strand between the side and top hair. This strand of hair will be the control.
Thus, all the hair at the top of the head will be combed in successive strands perpendicular to the face.
The effect of such a haircut is to automatically get a gain in length.
When cutting, it is necessary to strive at the same time to ensure that as you move towards the front of the head, the length of the hair increases.
Then we comb the hair in the upper part of the head as it should lie in the hairstyle, compare it with the side hair (from the face to the back of the head).
Next, we determine the length of the tanks.
Having outlined the contour of the ear, we lighten the mass of hair in this area with the help of thinning scissors.
Then we evenly lighten the bottom of the back of the head and check the front strand of hair by combing the hair over the face.
Her contour should fit into the line obliquely to match the asymmetrical length of the hair at the top of the head.
We dry the hair on the sides well, lifting the hair, then we continue styling, using a brush and a hair dryer, trying to maintain the maximum volume of the hair.
It is necessary to observe a clearly marked change in the length of the hair in profile and in front.
It should be emphasized that this triangular and asymmetrical shape of the hairstyle is obtained solely due to the haircut.

Divide your hair into six sections, starting from the center of the crown.

Control strand of hair for the occipital area at the marginal hairline
We cut the back of the head using the strand by strand method with a 60° guy line

All hair of the parietal zone is consistently equated to the control strand

Control strand of hair for the crown of the parting

We facilitate the mass of hair of the temporal zones

We perform an asymmetric fringing of the bangs with an “angle”

Men's sports haircut .

Hair when performing a sports haircut: not very thin and sparse.
Tools for performing sports haircuts: straight scissors, comb, thinning scissors.
Skill Level: Beginner.

The styling of this men's sporty haircut can vary widely depending on the style and situation.
Undoubtedly, there is nothing more convenient than a short haircut, but the requirements for the quality of the hairdresser's work in this case will be increased. Here is a haircut option for a man of a business or sports style, striving for accuracy and restraint, and not romanticism.
Remember, any haircut requires maximum precision from the master, and a short haircut especially.
Performing a male sports haircut
We start cutting hair from the occipital zone. In the center of the occipital zone, with vertical partings, we select a strand of hair 1 cm wide, comb the strand perpendicular to the head and cut at an angle of 90 °. The length of the hair strand is approximately 3 cm.
This strand of hair will be the control.
We move from the center to the temples, focusing on the control strand.
So we do a haircut of the entire upper occipital zone.
Let's move on to cutting the temples.
We define a strand along the edge line of hair growth with a vertical parting, pull it perpendicular to the head and cut it at an angle of 90 °, while the fingers are firmly pressed to the head, and move to the back of the head.
Then we select a strand of hair in the center of the parietal zone with vertical partings, comb the strand perpendicular to the head and cut it to the length we need (from 3 cm and longer). Retraction during cutting 90°. This strand of hair will be the control. With its help, we will determine the length of the strands on the crown, which we will highlight not with vertical, but with horizontal partings.
We select a strand parallel to the edge line of hair growth near the face, comb it perpendicular to the head and cut it, focusing on the control strand.
So we divide and cut the entire parietal zone with horizontal partings. We connect the parietal and temporal zones, cut off the corner.
We make the edging of the haircut at the back of the head, behind the ears and at the temples.
On the back of the head, using the shading technique, we make a smooth transition from short hair along the edge of hair growth to the already trimmed upper occipital zone. We use the same technique on the temples.
We remove all possible shortcomings with the help of thinning scissors.
We fillet the bangs with straight scissors with a sliding cut. Thinning with a sliding cut must be done so that the hair breaks into strands on its own, and at the same time the bangs will look very natural.
We fix the hair with gel and lay it in the right direction (lift it at the roots or smooth it).

Control strand of hair in the center of the occipital area 1 cm wide

We cut the temples with vertical partings
We carry out the edging of the temples

In the center of the parietal zone, select a strand of hair

Determine the length of the control strand of hair for the crown

We mill the bangs with straight scissors with a sliding cut

Haircut "teeth".

Toothed hair: curly or slightly curly.
Tools for cutting "cloves": straight scissors.
Skill level: having mastered the main types of cuts.

Haircut "teeth" is suitable, first of all, for those who have curly hair.
The “teeth” haircut looks quite short, and the “teeth” haircut technique allows the hair to look thicker.
The “teeth” cut creates soft contours of the cuts.
The haircut looks very natural and at the same time neat.
Cutting hair with "teeth"
We start the haircut from the upper occipital zone of the hair. In the center, select a strand of hair, pull the strand perpendicular to the head and cut it with "cloves" to give the hair a softer texture.
Focusing on the freshly cut hair, with vertical partings, cut first the upper hair zone, and then the lower occipital zone.
During the haircut, we move from the center to the temples.
Remember that with an increase in the angle of the guy to either side, the strands will shorten or lengthen.
In the center of the parietal zone, we select a strand of hair with vertical partings, outline its length, focusing on the trimmed back of the head. We do the haircut on the fingers. This strand of hair will be the control.
The cut line runs parallel to the head, the hair on the back of the head serves as a length guide.
We cut the temples, focusing on the crown, highlighting the strands of hair with vertical partings.
We complete the haircut, performing a fringing on the back of the head, temples, we make out the edge line of the bangs, while giving the hair the effect of an “overgrown haircut”.
It is best to use wax to style your haircut.

In the center of the occipital zone, we select a strand of hair and perform a haircut with “teeth”

Control strand of hair in the center of the parietal zone
Haircut of the temples is performed, focusing on the crown

Give hair the effect of "overgrown haircut"

Men's haircut graduated bob.

Hair when performing a male haircut graduated caret: soft or medium softness.
Tools for cutting a graduated caret: straight scissors.
Skill level: diligent beginner.

A graduated bob haircut is liked by men with slightly curly hair and those who like to take care of themselves and devote enough time to their appearance.
A graduated caret can be worn with or without a parting.
Often a bob haircut is performed without graduation.
You can also perform such a caret, for this it will be enough to make only the first part of the haircut (before graduation).
Technique for performing men's haircuts graduated bob
Men's graduated bob haircut for fairly long hair, and bob haircut is performed only on wet hair.
With a horizontal parting, we select a strand of hair on the back of the head along the edge of growth.
We stab all hair above the selected strand for convenience.
Determine the length of the hair strand.
It should be remembered that after the hair dries, the length of the hair will decrease. Therefore, the first strand should be slightly longer than the desired length.
This strand of hair will be the control for the first step of the haircut.
Also, with a horizontal parting, we select a strand of hair above the control strand, comb it out with it and cut it off on the fingers, focusing on the control strand, while the hair extension should be zero.
If the caret should be without graduation, each strand during the haircut should be 1.5-2 mm longer than the previous one.
During the haircut, we gradually move on to the temples.
That is, when during a haircut you draw a horizontal parting at the level of the top of the ear, then this parting will already be all over the head from ear to ear.
For graduation, select a strand of hair at the crown. This strand at the base should have a rhombus with peaks directed towards the middle of the neck and face, towards the ears. Hair extension 90°.
Determine the length of the strand. The strand must be at least 10 cm.
All other hair is sequentially pulled up to the control strand of hair and cut off.
We do the calibration like this. In parallel to each of the partings in the occipital zone, we select a strand, comb it to the control strand and cut it off at its level.
We do all this until we cut off all the hair longer than the control strand.
Graduation is more convenient to perform from the back of the head.
We comb all the hair on the face and perform an oval edging. You can trim the hair with a sliding cut or teeth.
We finalize the entire haircut with a sliding cut over the entire head from the roots of the hair to the ends.

HAIRDRESSER'S ADVICE
If you are doing a bob haircut without graduation, then at the end of the haircut, work through all the hair using the pointing method. Do all the same movements that you did just now, only the scissors need to be held parallel to the hair. Pointing is done on dry hair.

We cut the control strand, the length of the strand determines the length of the bob haircut

We select the occipital strands of hair with horizontal partings and cut off at the level of the control strand
When we rise to the temples, we make partings from ear to ear

For graduation at the crown, select a strand of hair, at the base of which is a rhombus

We carry out a fringing of hair at the face in the form of an arc

Men's haircut creative "hat".

Hair when performing a men's haircut creative "hat": thick.
Tools for haircut creative "hat": straight scissors.
Skill Level: Excellent knowledge of basic Haircut techniques.

Men's haircut creative "hat" is a very modern youth haircut.
Haircut creative "hat" is easy to fit, "keeps" well on any hair and retains its shape for a long time.
For a creative cap haircut, there are many options for hair coloring and hair styling.
Such a haircut will emphasize the masculinity of a romantic man and adorn a courageous one.
Technique for performing men's haircuts creative "hat"
Haircut creative "hat" we begin with a fringing of hair. Separate the temporal area of ​​the hair with a parting from the parietal area and perform a straight edging of the hair at the temple.
As you should, work out the edging of the hair behind the ear. The hair should run along the base of the ear.
Similarly, we trim the hair on the other side.
We comb all the hair back and trim the hair at the back of the head.
The edging of the hair should be straight, and the transition from the edging behind the ears should be almost vertical.
With a straight parting from ear to ear above the earlobes, we separate the hair of the parietal zone.
All hair below the parting with a shear, highlighting vertical strands, with a 90 ° hair extension. We cut the hair at an angle of 45 °.
We cut this zone from the middle of the back of the head, first to one side, then to the other side.
We comb all the hair in height and outline the line of the “hat” with straight cuts.
On the top of the head in the parietal zone (on the sagittal parting), we select a wide strand of hair, determine the length and cut the strand of hair with cloves.
We cut all the hair on the crown of the head using the strand by strand method, moving from the back of the head.
We cut the entire parietal zone to the bangs, highlighting the hair with wide strands.
We cut bangs with straight cuts at an angle.
To do this, we divide the entire bangs into several horizontal strands of hair and cut them at different angles.
All the hair of the parietal zone, starting with the bangs, is worked out using the pointing method already on dry hair.
We apply styling foam to damp hair, and dry the hair with a hairdryer using a simple comb or comb.
If you perform styling with brushing, then the appearance of the client will be softer and not brighter.

We perform edging of hair at the temples with straight scissors

We carry out the edging of the hair on the back of the head in a straight line
The hair zone below the parting with a haircut, highlighting the hair with vertical strands

We cut the parietal zone from the back of the head to the face to the bangs

We set the line of the “hat” all over the head, starting from the back of the head

All the hair of the parietal zone, starting with the bangs, we work with pointing

Men's haircut double bob.

Hair when performing a double bob haircut: any.
Tools for cutting a double caret: straight scissors, thinning scissors.
Skill level: mastery of basic haircut techniques.

Double caret is a bright creative men's haircut that will require accuracy and skill from you.
Although the haircut is called a bob, the way this haircut is done is different from what was previously described.
Men's double bob haircut is suitable for men who like to style their hair in locks and wear long bangs with pleasure.
Technique for performing male haircuts double bob
With a zigzag parting, we separate the temporal zones and the occipital zone of the hair.
This parting should start at the face on one side and end on the other side (that is, from one temple to the other). The parting should go above the ears.
We pin the hair above the parting so that the hair does not interfere during the haircut.
Below the parting at the temple, we select a strand of hair and determine the length of the upper part of the haircut (approximately to the middle of the ear).
Now, highlighting the strands with vertical partings, we will graduate the hair of the lower part of the haircut, moving from the face to the back of the head.
We comb each selected strand up and cut it off at the level of the trimmed earlier edging. So we perform a haircut first on one side of the head, then on the other.
We carry out the edging of the bob haircut all over the head. We cut the hair on the fingers with a slight pull of the hair towards ourselves. Then we mill the edge of the edging with a serrated cut or thinning scissors (if the hair is very thick).
In the center of the parietal zone, we select a strand of hair.
We twist the strand into a tourniquet and cut it off at the required level of about 10 cm.
From the central point on the parietal zone, we separate the strands of hair and cut the strands, moving clockwise. Cut off the hair parallel to the head.
The guideline for the length will be the hair cut before.
If the hair is thick enough, work through the entire parietal zone, stepping back 2-3 cm from the ends.
We carry out the edging of the strands of hair near the face with straight scissors with a sliding cut. We start the edging from the middle of the bangs down, first from one side, then from the other side.
We pass along the entire length of the hair with a sliding cut with straight scissors.
You can style a double bob haircut in completely different ways, depending on the wishes of the client.

Below the parting, select a strand of hair and determine the length of the upper part of the haircut

Graduation of the lower part of the hair

We perform a double bob haircut edging all over the head
In the center of the parietal zone, select a strand, twist it into a tourniquet and cut it off

We cut the crown of the head in a circle, focusing on the hair cut earlier

Hair symmetry control when cutting a double bob in front

A modern version of the men's half-box haircut.

Hair when performing a modern version of a male half-box haircut: any.
Tools for performing a modern version of the male half-box haircut: straight scissors, thinning scissors, comb, hair clipper.
Skill level: mastery of basic haircut techniques.

The modern version of the men's half-box haircut is suitable for all occasions -
both for especially solemn occasions, or business negotiations, and for sports.
Once you've mastered the classic haircuts, try this new haircut technique.
It has several new tricks - having mastered them, you can diversify the performance of other haircuts
Technique for performing a modern version of a male half-box haircut
We start the haircut by edging the hair behind the ears, and then edging the hair at the back of the head.
With a hair clipper, we remove the fluff on the back of the head and finalize the edging line.
This method of edging hair is very convenient, as it allows even a non-professional to complete the edging quickly and without errors.
On the back of the head with thinning scissors, we cut the hair with the method of removing the hair “to nothing”.
Especially frequent movements with scissors are performed along the edging line.
We perform thinning itself many times, first at the ends of the hair, and each time we make a haircut, introducing the comb deeper into the hair.
With vertical partings at an angle of 30-45 °, we cut the hair of the upper right and upper left temporal zones using the strand by strand method.
In this case, we focus on the hair of the lower temporal zones.
We cut the hair of the upper occipital zone from the temples to the back of the head on the fingers.
We select the strands with horizontal partings, pull the hair at an angle of 90 ° and cut it off, focusing on the freshly cut hair.
In the upper occipital zone, we perform a check with horizontal partings. We remove all inaccuracies with a cut with cloves.
Checking with perpendicular partings is always the best option, and especially for short haircuts, as it is difficult to grab hair with thin strands.
In the parietal zone between four fingers, pinch three strands of hair, lift the strands vertically and randomly cut in the form of a herringbone.
Strand by strand, thin out the parietal zone at the roots with thinning scissors.
Perform a fringing of the hair on the bangs with “teeth”.

We start the half-box haircut by edging the hair all over the head

Using a hair clipper, we finalize the edging

We reduce the lower occipital zone "to nothing".
We cut whiskey with vertical partings from the face, cut at an angle of 30-45 °

Control strand of hair for the upper occipital area at the temple

On the crown of the head, we clamp the strands between the fingers and the haircut in the form of a "Christmas tree"

We make thinning haircut half-box on a comb

We carry out the edging of the hair on the bangs with “teeth”

Haircut beard and mustache.

Beards.
Beard trim.
Face correction with a beard.
Mustache and sideburns

A beard and mustache can not only beautify faces, but also hide existing flaws, such as a small or sloping chin,
too full cheeks, a long or very wide nose, a large distance between the nose and the upper lip, full lips, etc.
The hair of the beard and mustache is coarser compared to the hair of the head, sometimes the hair of the beard and mustache grows unevenly and may even have different shades of color.
The density of mustache and beard hair also varies.
All this must be taken into account when choosing their style, because it is impossible, for example, to wear a mustache if hair grows very rarely above the upper lip.
Beards

The choice of beard shape is purely individual. The beard can be oval, wedge-shaped, wide, narrow, have the shape of a trapezoid, shoulder blade, "frill".
When cutting a beard, it is always necessary to take into account the color of the hair: for example, with dark hair and fair skin of the face, one should not make the shape of the beard very voluminous, and it is better to shave the hair on the cheeks so that the hair does not stand out too sharply on the face (square, “horseshoe”, skipper).
With fair and red hair, the beard can be wide, since the beard no longer stands out so sharply against the background of the face.
The choice of the shape and size of the beard is also influenced by the height of the person. So, with small stature, the beard should also be small in size (“frill”, square, goatee).
With an average height, the choice of the style of a beard and mustache is unlimited, but tall men need to wear a large bushy beard, which significantly enlarges the face and improves the proportions of the figure. When choosing a mustache style, height should also be considered.
Hair on the cheeks can be shaved off, or left on.
If the hair on the cheeks is not shaved, then the haircut of the beard should begin with the design of the base - removing the hair on the cheeks and neck.
At the same time, the longer the beard, the less hair on the cheeks and neck should be removed.
Before starting the haircut, the beard should be combed well by placing the palm of the left hand under the beard.
Then cut the hair from the sides, while holding the scissors with the ends up. When reducing the beard cone to nothing, it is necessary to constantly ensure that its sharp end is located exactly in the center of the chin.
After that, the hair is shaded over the jaw near the ears, and then the entire surface of the beard is polished.
If the cheeks must be shaved, then the work begins precisely with shaving the cheeks and neck to the line where the beard begins.
Then the mustache is trimmed, the hair under the lower lip is removed and the design of the beard begins on the comb.
The oblique edges of the beard should be very thinly shaded.
The simplest, artless form of a beard is worn, as a rule, by people who are engaged in purely male work and showing that they have no time to take care of themselves.
The English (skipper) beard is most often preferred by men who are related to the sea and want to emphasize this.
The goatee is usually associated with the image of a courageous intellectual. The hair on the cheeks is removed very shortly or even shaved off. After that, the transition is worked out, and it is very important that the side lines of the beard are strictly symmetrical.
Oval beard. First, they cut the hair on the neck, on the cheeks, and then (standing to the right of the client) cut the right side of the beard, smoothly reducing the hair “to nothing” to the temples. Then, moving to the left side, they similarly draw up the left side of the beard. After that, the oval contour of the beard is formed and polished.
A long bob beard is cut similarly to a Russian beard. The hair on the cheeks closer to the cheekbones is removed and extinguished, the mustache is separated from the beard by a sharp line. When cutting a short beard, a square requires great care.
On the right and left sides, the hair is removed along an oblique line from the earlobes to the mustache, on the neck and cheekbones they are shaved. Then all the edges are carefully shaded and polished.
Russian beard. Starting a haircut, first of all, cut the base of the beard. The cheeks are not shaved, the ends of the hair are usually left in their natural form. The line of hair on the cheeks is not interrupted and forms a single whole with the hair of the beard. The mustache is separated from the beard, for this, at the corners of the mouth and lower lip, the hair is cut with the ends of the scissors. The goatee (hair under the lower lip) should also be removed.
After that, having carefully combed the beard, they proceed to the final design of the beard (depending on the intended shape). The beard can be cut from the sides, left longer or shorter.
Tapered beard. A tapered beard is characterized by a pointed end and straight cone lines. In no case should they be bent or broken. Hair on the cheeks can be shaved off, or left on.

FACE CORRECTION WITH A BEARD
A round face is corrected by the splendor of the hairstyle in the parietal zone and the beard from temple to temple of an elongated shape (for example, "trapeze"). The mustache should be of medium size with the ends down.
A triangular face, tapering downwards, requires a rounded horseshoe or square beard to widen the lower part of the face and give the chin a more massive look.
An elongated face is corrected by a wide rounded beard (for example, an oval in the shape of a horseshoe, a trapezoid). It is not recommended to wear a goatee or a cone-shaped beard, as such beards visually lengthen the face even more.
A trapezoidal face is corrected by a beard, which visually narrows it in the lower jaw area.
For this, a “jabot” beard, skipper, such as a square, is suitable.

beard trim

Combing the beard, holding the beard with the left hand
We cut the hair from the sides of the beard while holding the hair up

Shading sideburns on a comb

You can trim sideburns with a hair clipper

types and forms of beards
Spade beard Wedge beard
Skipper's beard Jabot beard
Russian narrow beard (may be short, medium, full) Russian wide beard (most often shoulder-shaped)
french pointed beard french full beard

Wedge-shaped

SKIPPER

Russian narrow

Russian shovel

French narrow

french full

Haircut of mustaches and sideburns.

Mustache and sideburns
Psychologists say that the shape of the mustache can determine the character of a person and find out whether he imitates idols, follows fashion trends or adheres to his views, while maintaining individuality. For example, a walrus mustache betrays a lover of zucchini and cheerful companies.
The shape of the mustache is determined by facial features and primarily by the size of the nose and lips.
Mustaches can be shortened, short, long, narrow, lush, curly.
Long mustaches (such mustaches are also called Ukrainian) have narrow ends, which are formed with a razor, using the thinning method.
If the mustache is too lush, you can thin out the layer of hair with thinning scissors; to reduce the length of the mustache, the mustache should be trimmed by combing from the ends to the roots.
Short, or English, mustaches are trimmed against the growth of the hair, and then the mustache is shaped.
When cutting mustaches, scissors should not be in a very sloping position, otherwise you can injure the skin above the upper lip.
Curly mustache. First, the mustache itself is trimmed, and then the notch in the middle of the mustache is shaved with the ends of the razor. In order to get a curly shape, the edges of the mustache are trimmed.
Sideburns should always have a clear, defined shape. To prevent sideburns from reaching those areas of the skin where there is no hair, sideburns are carefully edged along the sides and bottom edge.
The hair of the temples and sideburns should be the same length and form a single line.
Sideburns are trimmed with scissors and a hair clipper.
Mustaches, beards, stylish sideburns always attract attention and make a man look impressive.
When choosing some model of mustaches, beards, sideburns, one must take into account the fashionable direction, but always in accordance with the individuality of the person.

HAIRDRESSER'S ADVICE
Mustaches and beards must be very well-groomed, otherwise they take on a sloppy look and do not adorn their owner.
mustache types and shapes

Ukrainian full mustache 1

curly mustache 2

Semicircular full mustache 3

Voluminous mustache emphasize efficiency, position, confidence 4

Such a mustache may belong to a person of "bohemia", romance 5

The elegant look of the "socialite lion" will successfully complement the mustache 6

This is the mustache of a womanizer, a heartthrob, a horseman and women 7

An elegant fluffy mustache characterizes its owner as a thinking person who knows how to make independent decisions 8

Mustache of an intelligent business person, neat and precise in carrying out his decisions 9

Mustache of a military man who has not lost bearing 10

Belarusian mustache 11

Mustaches with the ends down indicate doubt, indecision, weak will12

How to cut men's haircuts at home

Many women found themselves in a situation where they needed to cut their husband's, child's or brother's hair at home. But in inexperienced hands, the hairstyle, most often, takes on a not very attractive appearance due to the lack of a scheme for its creation. You can spoil the image with one careless movement of your hand, therefore, before you get the right men's haircut, you should learn a few basic methods and techniques that will significantly improve your hairdressing skills.

Simple creation technology

Before you take on your husband's hairstyle at home, the hair must be moistened and combed well. After that, they need to be divided into several zones, which should be worked on separately. To begin with, two parallel partings are made from the frontal cavities to the back of the head, separating the temples, and then the parietal area. As a result, you should get 6 sections:

1. parietal,
2. 2 temporal,
3. 3 occipital (for starters, the upper and lower parts are separated, and then the lower part is divided by a vertical parting into another 2).

The haircut at home begins with raising a strand of the parietal zone at the temple. The hair is cut at a distance of 4 cm from the head, and after that each subsequent curl is equal to the previous one, due to which the same length is maintained. Strands during trimming are pulled perpendicular to the head. After that, you can take the temples from the edge of the growth of curls, shortening them with the described method to the very parting.

In order to make the lower edge of the hairstyle even, it is necessary to press it as tightly as possible to the neck. Some areas of the head begin to dry out and become unruly over time. To prevent this from happening, you need to moisten them periodically. Practice will help you learn how to do all this correctly.

The final stage

After the strands on each of the divided sections have become the same length, it is worth aligning the edging. At this stage, it is important to find out what exactly a man would like to see from the options described below.

You can correctly make a border at home on the neck in several forms:

1. oval;
2. trapezoid;
3. with rounded edges.

To avoid unevenness, after each movement with scissors, you should carefully comb your hair in the direction of growth and follow the longer strands. The bangs are aligned along the length of the parietal part and rounded in such a way that it smoothly connects with the temples.

It is also necessary to comb the strands more often in different directions. This helps to see individual hairs that have broken out of the total mass.

Under the machine - we do it ourselves

To independently and correctly make a beautiful men's hairstyle with this method at home, you do not need to have professional skills. But a little training is still needed. After all, one careless movement can be the cause of shortening all the strands on the head. Doing a haircut for a typewriter yourself will not only help save money, but also become a way to learn how to create a fashionable and attractive male image at home, combining several characteristics:

• brutality;
• conservatism;
• accuracy.

But, looking at the schemes of popular men's hairstyles, it is worth remembering that you need to take into account the features of the face and the shape of the head.

The simplest option is zero. Almost everyone can do this hairstyle correctly, without having the skills of a hairdresser and knowledge of haircut patterns. But it is worth remembering that it is suitable only for men who have a standard round head shape.

Sports hairstyles are somewhat longer, but cut according to the same principle. It will be more difficult to make a box or a semi-box correctly without skills and a scheme. But if you follow the technique, then no problems will arise.

Another type of short hairstyles is the so-called hedgehog, which has a rounded shape. This option is suitable for men with coarse hair type.

Stages of work

The technique of creating hairstyles for men is to follow a few basic rules. Before you start, be sure to comb your hair and dry it, as some machines may not be able to cope with wet strands.

At the first stage, the strands on the back of the head are cut, and then the hairdresser goes to the temples. First, a nozzle of a certain length is fixed on the machine, and the strands are cut off approximately to the parietal part of the head. To avoid unevenness, you should run the machine in one place several times.

After that, a smaller nozzle is put on, and the process is repeated, but the top edge should be slightly lower in order to get a smooth transition from the shortest to the longest strands.

To cut hair at the very bottom, a flat comb is used, which needs to grab a certain amount of hair. The comb is placed at a slight angle to the head, and all protruding areas are cut off with a machine. Thanks to such actions, a very smooth transition from the growth line to longer strands is obtained.

Factors affecting the choice

Some guys go for a very short haircut, while others are categorically against this option and prefer long curls. But you can make a hairstyle for both one and the other correctly with the help of a machine with scissors, without visiting a professional hairdresser.

If a man has an irregular head shape, then you should learn how to create a hairstyle according to the scheme in such a way that she hides it. With an elongated back of the head, for example, the length of the strands above the forehead should, of course, be longer. The shape of the nape can also be adjusted with a machine, making the right transition from shorter to longer hair.

One of the most acceptable options is a half-box, as this type of hairstyle is able to give the desired shape to the head and at the same time can be done at home using a typewriter.

In addition, with the help of strands, the hairdresser is able to change the visible growth line if it does not suit the man. Professionals have special hairstyles and methods for their implementation for certain body types and face shapes.

Benefits of short options

With the help of a typewriter, you can learn how to create interesting images for your husband at home, ranging from classic to extraordinary options, in which patterns are created on the head or hair is shaved asymmetrically. In any case, such hairstyles are very easy to change after waiting a few weeks, unlike the options with long curls.

Thus, creating men's hairstyles at home is not as difficult as it might seem. And the many options and methods for their application allow women to experiment and find more suitable images for their husband.

More information

Modern male model haircuts are very diverse. In terms of the number of creative solutions and ways to cut the same hairstyle, they, perhaps, can even bypass women's haircuts. Meanwhile, there are a number of the most popular hairstyles, which are worth dwelling on in more detail. They will be discussed in this article.

Selection of male model haircuts

Model haircuts differ from basic (classic) ones in that before starting work, the stylist tries to evaluate in detail the image of the man sitting in front of him: his energy, hair structure, face shape. And after that, he proceeds to the haircut, selects the most profitable and successful version of the hairstyle, complements it with interesting accents and details.

The technique for performing a male model haircut is based on several main points:

• Man's style. It is customary to divide all men's haircuts into several categories: classic, sports, military, romantic style or grunge style. Depending on what kind of lifestyle a man leads, a haircut is selected for him.
• Hair structure. Thin, coarse, thick or curly hair needs to be styled accordingly. For volume, the stylist uses graduation and layering, to reduce splendor - thinning, for curly curls - special haircuts (long or short).
• The shape of the face and head. Modeling the proportions of the appearance occurs due to manipulations with the volume at the crown, the formation of bangs, the creation of smooth transitions in cutting or a torn effect in the strands.

Types of men's haircuts

Classic

Classics are universal haircuts that are perfect for any clothes and any male look. Basically, such model men's haircuts are created for medium hair or moderately short lengths.

Basic classic

A classic model men's haircut is created by a hairdresser in the course of work, made neat and seasoned. Hair is cut approximately the same around the entire circumference of the head. Slight graduation is allowed, the length of the hair increases slightly when moving towards the crown of the head. A classic haircut can be formed with short or medium bangs.

Polka

Polka is one of the popular classic men's hairstyles. In the temporal zone, the hair is cut quite short, but the final length (ultra-short or medium) depends on the shape of the face and the age of the client. The strands on the back of the head and on the sides are cut off by gradually increasing the length from the bottom up. At the crown, when moving from the crown to the bangs, the hair gradually increases in length. The bangs are cut in the shape of a toe.

British

The British is created on hair of medium length, straight or slightly curly. The temples and the back of the head are made shorter than the crown region, they are created the same in length or with a cascading effect. In this case, the difference in the length of the hair on the crown and sides should be noticeable and pronounced. At the top, the hair remains long. The graduation of the strands in the parietal region can be reinforced or smooth and light, with thinning and sharp tips.

Canadian

The Canadian is formed by shaving the temples and cutting off the top of the head, which is not too short. Whiskey and the back of the head are subjected to enhanced processing: there is a fringing of the auricles and the lower part of the hair. The closer the master is to the neck, the shorter the hair should be. Moving the machine at an angle from bottom to top, a smooth transition is created in length and a gradual infusion of the sides into the top of the head. The top of the hair is made voluminous, the strands are milled.

Classic model haircuts are laid on their side with a parting or placed on top. A slight negligence in the image is also allowed.

Sport

The main purpose of sports haircuts is convenience, some audacity and, of course, sports accents. Such model men's haircuts for short hair are created.

Boxing and semi-boxing

Boxing and semi-boxing are characterized by a very short hair length. Boxing somewhat imitates a gladiator helmet: the sides are completely or almost completely shaved off, and a short cap of hair remains on the top of the head. The forehead gets a soft heart edging. The half-box involves shaving the sides and temples similar to boxing. However, in this haircut, the crown becomes longer. The hair at the top of the head is milled and smoothly styled into a hairstyle.

Tennis

This haircut has become popular thanks to famous tennis players. The principle of cutting is as follows: the temples and the back of the head are shaved or cut short with a gradual lengthening of the hair to the crown, the top of the head becomes voluminous, the hair remains medium in length, having a straight, even cut. A platform of their voluminous strands is formed at the crown.

Caesar

It is considered a short, strict and graphic haircut. Its feature is clear lines and a contoured silhouette. At the forehead, the hair has a short, straight cut. The crown is cut off with a reference to the control curl in the bangs area. The sides can have a similar length to the top or shorten when moving towards the neck. To complete the hairstyle, the master additionally makes a trim around the circumference of the entire haircut with a machine.

Pompadour

Pompadour is a hairstyle with a slight touch of freedom, rock style and ease. The peculiarity of the haircut is a rather long crown with bangs and neatly shaved sides. The crown strands are multi-stage, elongating when moving from the crown to the forehead and from the sides to the center. The bangs are long, laid in the form of a tuft. The sides have a sharp, accentuating transition in length: from complete shaving, in the lower part, to longer strands, closer to the crown.

Sports and military haircuts are easy to maintain and do not require serious styling, with the possible exception of the rock pompadour haircut and the classic German officer.

Military

Military style in male model haircuts, with rare exceptions, implies ultra-short length. These hairstyles look great on large, muscular men who have bald patches or coarse facial features.

Zero haircut and hedgehog

In a haircut to zero, the hair is completely shaved off. In extreme cases, a slight hint of the presence of hair may remain in the crown area. The hedgehog is created on a very short length. The sides are either completely removed, or a short stubble is left from the hair. The top is slightly longer than the sides. The whole haircut takes on a rounded shape. The crown is cut in such a length that the strands stand like thorns.

Playground

The platform (beaver) is a shortened variation of the tennis haircut. A distinctive feature of the platform is its short length and square crown. The sides are shaved to zero or with a margin of 1-2 mm. The top of the hair is cut 2-4 cm long, the strands are shaped by a straight cut to create a flat area of ​​hair. The sides of the crown have a sharp break at a right angle to the temples.

German officer

This haircut has a lot of names: Fritz, Hitler Youth or Preppy. She differs from her short counterparts in the average length of her hair. The sides and back of the head are made about 5 cm long, the crown is cut off within 10 cm, has a bang. The hairstyle is styled on the box with a characteristic parting, the hair is treated with a gel for smoothness and light shine. In the new season, shaving of the temples or transitions in the length of the sides are acceptable.

Romance

Romantic style implies the average length of the strands. But there are times when a romantic male model haircut is formed on long hair.

Preston

The priston is cut according to the principle of lengthening the hair in the bangs. The sides and back of the head acquire an average length, are graduated and thinned. The crown from the parietal zone gradually flows into a longer bang, which fits neatly into the hair with a side parting. The top of the hair is cascading, with smooth transitions in length, the tips are in the form of soft feathers.

bob and kare

The total length of hair in a male bob and bob rarely goes below the cheekbones. The bob is cut with lengthening the strands to the face and by shortening the back of the head. The caret is formed with one length. Graduated men's bob and bob are in fashion now, as well as torn elements in a haircut. There are also shortened variations of these haircuts with a multi-layered, raised nape or elongated types of hairstyles with strands descending below the chin and reaching shoulder level.

Beanie

The cap is a haircut in which 2 layers of hair are clearly separated: the lower one is short and the upper one is rather long, with thick bangs. The cap, as a rule, does not go beyond the line of the earlobe. The top of the head is made multi-stage, uneven, with a torn effect. The bangs repeat the idea of ​​the whole haircut. It is quite long, profiled, with sharp tips.

Curls

Wavy hair likes medium to substantial length. Curly haircuts are created on the basis of the classics, as well as a bob or bob. However, the curls should not be too tight and tight, otherwise the hairstyle will lose its shape and the desired effect. Hair should be cut unevenly, with graduation, at an angle. In combination with lightly masculine stubble, curly haircuts look especially sexy.

Curly haircuts have gained popularity since the release of Game of Thrones, becoming a great alternative for men with naturally curly hair.

Creative and grunge

This style implies the absence of strict forms, stereotypes and conservatism. Haircuts are very different in length, have asymmetrical or unusual accents.

Shaved temples with patterns and beard

Shavings and patterns are created on the basis of classic or sporty variations of male model haircuts. The top of the head rises, a mohawk or bouffant is formed. Beautiful patterns are shaved on one or two temples, an interesting edging is created in the area of ​​​​the neckline. A fashionable trend is the smooth transition of a short hairstyle into a beard, which also receives a fringing and a beautiful pattern.

Classic men's haircut- This is a haircut for men of any age and occupation. Haircut style: correct, clear edging lines and beautiful shading of hair in the temples and neck. There are many variants of this model, but the main features are the same.

Performing a classic men's haircut .

Hair when performing a classic men's haircut: any.
Tools for performing a classic men's haircut: straight scissors, fil. scissors, comb.
Skill level: mastery of basic haircut techniques.
This men's hairstyle is classified as a classic style.
Strands of hair of moderate length are laid away from the face, the temple is open straight. This style is loved by many men of any age.
There are a lot of options for haircuts for men in a classic style. Perhaps, after studying a few, you will come up with your own haircut technique.
Before starting a classic men's haircut, divide clean, damp hair into zones.
We start the classic men's haircut from the right temporal zone. Parallel to the marginal hairline, we select a strand of hair with a diagonal parting, first we comb it on the face and cut off the corner of the temple to the face. We comb down and perform the edging of the temple. The temple must be straight.

With a horizontal parting, we select a strand of hair at the temple, pull it off at an angle of 90 ° and cut it with a straight cut. So in a row, highlighting the strands with horizontal partings, we cut all the strands of the temporal zones, first from the right, and then from the left side.

Control strand of hair for the upper occipital area at the temple

The reference point will be the freshly cut strands of hair in the temporal zones.
We cut the occipital zone from right to left from ear to ear so that each subsequent strand is perpendicular to the head and equal to the previous one.
We also cut the lower occipital area with vertical partings, with a 90 ° brace, cut the strand at an angle of 45 °.

We carry out the edging of the hair of the lower occipital zone and behind the ears.

In the parietal zone at the marginal hairline, select a strand of hair, cut off a strand of hair at a distance of 3-4 cm from the roots. This strand of hair will be the control. We cut the entire parietal zone using the strand by strand method with a hair extension of 90 °.

Unifying haircut between the crown and temporal zones

half box

When performing this style of haircut, the hair from the edging line on the neck and temples is cut with an electric clipper (No. 2, 3) to the line passing from the upper edge of the left ear under the occiput to the upper edge of the right ear. A smooth reduction of hair to nothing is carried out in a section 2–3 cm wide up from this line. When performing a half-box haircut, all hair processing operations, as well as any cutting tool, can be applied. However, most often four operations are sufficient: hair reduction, hair cutting on the fingers, hair cutting with a clipper and edging.

Boxing

haircut box differs from the semi-box in shorter hair. The hair reduction area in this style of haircut is higher than in the semi-box, and usually separates the parietal section of the hair from the temporal and occipital. To perform this haircut, the same operations and tools are used as with a semi-box.

Haircut "hedgehog", "beaver", "square"

Tools: simple scissors, thinning scissors, comb, comb comb, hair dryer, machine.

Tools: straight scissors, comb, electric machine, brush.
Haircut techniques: “on the fingers” method, shading, edging.
Haircut shape: hedgehog haircut- has an oval shape, slightly elongated above the crown.

Bobby haircut has the shape of a platform in the parietal zone, rounded at the temples, as in a hedgehog haircut.

Bob haircut" in the parietal and temporal zones it has the shape of a platform.

Execution Technology. All three haircuts are performed on washed hair: with a machine - on dry hair, with scissors - on moistened hair. If the hair is long, they are shortened to the desired length along the entire scalp using the “on the fingers” method. With a machine with a knife height of 3 mm, hair is cut from the beginning of their growth with the machine moving up along the marginal line of hair growth on the right temple, nape, and left temple.

Binders are applied to the hair. With the help of a massage brush and a comb comb, comb the hair against growth, put it vertically.

In a hedgehog haircut extinguish the hair on the back of the head and temples, starting from the right temple. They pass to the parietal zone, forming a general oval shape. Hair edging at the temples, behind the auricles, on the neck is performed with a machine or a safety razor.

In bob haircut the hair of the temporal zones is cut, as in a hedgehog haircut. The plane of the parietal zone is strictly horizontal; for this, the scissors and the comb must be held horizontally.

In a bob haircut the plane of the parietal zone is performed, as in a bob haircut. The hair of the temporal zones is cut according to the following rule: on the right temple, the comb is held vertically, scissors - with the ends down; on the left temple, the comb is held vertically, the scissors - with the ends up.
The edging line in all three haircuts is straight.

Attestation work

Lebedeva Alena Nikolaevna

Checked: master

industrial training

Boyko Elena Sergeevna

Cherepovets

1. Introduction

2. Choice and justification of the model

3.Materials

4. Tools

7. List of references

8.App

Introduction:

Choice and justification of the model.

Materials.

RESULT:

• Soft cleansing
• Strength and energy of hair
• Tonic effect

RESULT:

o Intensive hydration

o Shiny and well-groomed hair

o Refreshing effect

Instruments.

Execution technology.

Preparatory work.

Washing head.

Drying and styling hair.

Final work.

Bibliography.

1. Kuleshkova O.N.

K90 Technology and equipment for hairdressing: a textbook for the beginning. prof. Education / O.N. Kuleshkov. - 5th building, ster. - M.: Publishing Center "Academy", 2008. - 144 p.

ISBN 978-5-7695-5277-9.

2. Notebook on p / o.

3. Magazine "Hairstyles".

Appendix.

Routing.

№	Execution Technology	Sketch
	I stage. Division into zones. 1. We draw a vertical parting from the middle of the forehead through the top of the head to the middle of the neck, we pin the hair on both sides. 2. Along the hair growth line above the ear and on the neck around the head with an arcuate parting at a distance of 2-3 cm on the edge line, we separate the strand and perform “winding down.” The edging on the neck is semicircular
	II stage. Temporal and upper occipital zone. 5. Arcuate with a parting passing around the head, through the middle (segment) of the nape, we separate the first strand, we stab it from the inside of the palm and with a 2-3 cm long haircut, focusing on the lower short hair of the temporal zones, in the direction from the temples to the middle of the nape. This strand KP. 6. With an arcuate parting from temple to temple around the head, select the next strand, comb it down and stab it with KP 2. We cut it at its level from the inside of the palm. 7. Using the method of applying “strand to strand” with a shear, both temporal strands are separated with arcuate partings, combed down and with a shear at the level of KP 2, in the direction from the temples to the middle of the nape. 8. We comb the hair of the parietal zone on the face and perform a straight edging on the bangs above the eyebrows from temple to temple, we perform the ends of the hair with teeth.
	Stage III. Lower occipital zone. 1. Separate a strand behind the right ear with a vertical parting, place it perpendicular to the back of the head and cut it from the outside of the palm, focusing on the length of the upper contour of the “Cap” and short hair on the neck. 2. By taking “strand by strand” with a haircut, the lower occipital zone, first from the right ear to the middle. Grab the strands from the outside of the palm, while smoothly connecting the top of the “Hat” contour with the lower short hair on the neck.

Attestation work

Student of group 291 by profession "Hairdresser"

Lebedeva Alena Nikolaevna

On the topic: "Technology for performing men's haircut tennis."

Checked: master

industrial training

Boyko Elena Sergeevna

Cherepovets

1. Introduction

2. Choice and justification of the model

3.Materials

4. Tools

5.Technology of work performance

6. Safety precautions when performing work

7. List of references

8.App

Introduction:

Haircuts are different. But in each new season they are united by one distinctive feature - they are always extra-fashionable for both men and women. These haircuts are the result of the creative work of the world's leading stylists. They are the embodiment of avant-garde ideas or a new interpretation of something old and long ago. forgotten.

Choice and justification of the model.

The choice of a haircut has its own rules: it is necessary to take into account the features of the figure, the type of face, the shape of the head, the type of hair, their color and quality. When choosing a haircut, it is also important to take into account the peculiarities of style, personality, age.

This model has an oval face shape, athletic build, tall height, dark blond hair.

Haircut "Tennis" is ideal for this type of appearance. It gives masculinity and despite the fact that it is short, it gives charm.

Male model haircut "Tennis".

Materials.

To wash the client's head, we use Estel CUREX Gentleman men's tonic shampoo. This shampoo quickly cleanses, removes excess sebum and gives hair strength. It has a softening and anti-inflammatory effect thanks to a special formula. Contains provitamin B5. Fills hair with energy, refreshes the scalp.

RESULT:

• Soft cleansing
• Strength and energy of hair
• Tonic effect

APPLICATION: Apply to damp hair, lather. Rinse thoroughly.

To moisturize and add shine, we use a moisturizing care spray from the same series as the shampoo. The spray moisturizes and conditions the hair, making it shiny and well-groomed. Fills the hair with strength and energy, refreshes the scalp. It has a softening effect thanks to a special formula.

RESULT:

o Intensive hydration

o Shiny and well-groomed hair

o Refreshing effect

APPLICATION: Spray onto clean, dry or damp hair. Do not rinse.

Instruments.

To perform this haircut, we need the following tools.

Straight scissors are designed for cutting hair.

Thinning scissors are needed to remove the density of hair and for a smoother transition from short to long hair.

A comb for men's haircuts is necessary for combing out strands of hair.

Hairdryer for drying and styling hair.

Electric hair clipper and a set of attachments.

Also, to perform a haircut, you need hairdressing underwear (apron, peignoir, collar, disposable towel).

Spray bottle to wet hair.

Skeleton comb for lifting hair at the root.

Execution technology.

Preparatory work.

At this stage of work, the workplace is prepared: checking the availability and serviceability of the necessary tools, preparing hairdressing underwear, perfumes, and accessories.

Then we invite the client to the chair. To do this, the master stands to the right of the chair and turns it towards the client. After the client sits down, the chair must be turned to the mirror. We conduct a preliminary conversation, as a result of which we find out what services the client wants to receive.

We wash our hands and disinfect the tools.

We carefully comb the hair in order to detect the presence of diseases, as well as to determine the type of hair and its condition.

We cover the client with hairdressing underwear (they use two towels and a napkin, while we put one towel on our shoulders, and wipe our hair with the second).

Pour the required amount of shampoo into a measuring cup. We regulate the water temperature (the optimum temperature for washing hair is 37-40 ° C).

Washing head.

When washing the head, we use the method of washing the hair with the head tilted back. Wet hair thoroughly with water. Pour the required amount of shampoo into the palm of your hand for more convenient distribution on the hair, as well as for warming. Shampoo evenly distribute on the hair, starting from the roots. We lather the shampoo on the hair in a circular motion, while the fingertips should move from the marginal hairline to the highest point of the head. We wash off the shampoo, and then apply the balm, evenly distributing it along the entire length. Wash off with water after a few minutes.

We wipe the hair with light wet movements. Then we comb the hair, starting from the ends.

Spray on clean, damp hair with a thermal protection spray.

Technology for performing male model haircut "Tennis".

Division into zones

1. We draw a vertical parting from the middle of the forehead through the top of the head to the middle of the neck, we pin the hair on both sides.

2. Along the hair growth line above the ear and on the neck around the head with an arcuate parting at a distance of 2-3 cm on the edge line, we separate the strand and perform “winding down.” The edging on the neck is semicircular.

Temporal and upper occipital zone.

1. Arcuate with a probe passing around the head, through the middle (segment) of the nape, we separate the first strand, we stab it from the inside of the palm and with a 2-3 cm long haircut, focusing on the lower short hair of the temporal zones, in the direction from the temples to the middle of the nape. This strand KP.

2. With an arcuate parting from temple to temple around the head, select the next strand, comb it down and stab it with KP 2. We cut at its level from the inside of the palm.

3. Using the technique of applying “strand to strand” with a shear, both temporal strands are separated with arched partings, combed down and with a shear at the level of KP 2, in the direction from the temples to the middle of the nape.

4. We comb the hair of the parietal zone on the face and perform a straight edging on the bangs above the eyebrows from temple to temple, we perform the ends of the hair with teeth.

Lower occipital region.

1. Separate a strand behind the right ear with a vertical parting, place it perpendicular to the back of the head and cut it from the outside of the palm, focusing on the length of the upper contour of the “Cap” and short hair on the neck.

2. By taking “strand by strand” with a haircut, the lower occipital zone, first from the right ear to the middle. Grab the strands from the outside of the palm, while smoothly connecting the top of the “Hat” contour with the lower short hair on the neck.

Drying and styling hair.

After the haircut is done, it is imperative to style the hair in order to give a certain shape to the haircut and complete the look.

We style the hair with a skeletal comb with short teeth to lift the hair at the root.

Final work.

At the final stage of work, we conduct a conversation with the client, showing the result of the work. We remove hairdresser's underwear from the client. We carry out the calculation according to the price list. We clean up the workplace, disinfect tools and fixtures. We are currently cleaning.