How to save mobile data on Android. What is Internet traffic Where to spend traffic

For customers who do not use unlimited tariff plans, the question of how you can check traffic for the Internet will always remain relevant.

The MTS mobile operator allows you to check the balance in several ways, regardless of which phone the check is used on. The mobile operator advises to conduct data verification on an ongoing basis. This will allow you to be online at any time, in addition, it will be possible not to spend money to connect additional services via the Internet. In the material from the article, all the ways will be described on how to find out the spent MTS traffic.

In order to find out the spent traffic, you can use the standard methods through your mobile phone. These operations can be done on any mobile phones, from old to modern. But it should be remembered that due to the algorithm for calculating the consumption of megabytes, the device and the provider are different, so the information may differ slightly. Thus, you can find out the parameters through the phone only for personal purposes, and you cannot check the consumption through the operator. To control the remaining megabytes, you must use any of the methods:

1. Traffic consumption can be clarified through SMS messages. In order to receive information on the balance, you just need to send an SMS with a question mark. The number to send is quite light and short 5340 . All messages will be free of charge and will not be charged. After the system receives the message, another message will come in response, which will provide information on the spent megabytes, as well as how much more traffic can be spent. This method checks an unlimited number of times.
2. Another method for checking consumed traffic is to use a service combination. Since there are a lot of options and tariff plans, there are also several requests to check the consumption of megabytes. For example, if users use tariff plans from the Smart family on a SIM card, then it will be necessary to use the command * 100 * 1 # for detailing. After the client has used all the package megabytes, and after connecting additional options, it is necessary to use the combination * 111 * 217 # for control. You can use this service on such options as BIT, Internet mini, maxi, SuperBIT and others. You can also use the combination * 217 # .

Testing on tablet devices

Some tablet devices do not have the ability to send service combinations. Therefore, the owners of such devices have a little more difficulty. For them, you can find out information on the consumption of megabytes only through the use of the Internet. To do this, you need to use your personal account on the website of the MTS operator. Subscribers will need to go to the company's website and go to their personal account. After that, go through authorization, in which you enter your login (mobile phone) and password (comes via SMS through a request on the site). Next, in the office itself, you need to go to the tab with the account status. In the menu, you need to select the rest of the packages and after that you can see all the detailed information on the issue of interest about the expense. Through a personal account, customers can not only find out about the spent traffic, but also fully control the SIM card, connect and disconnect services and tariff plans.

Also, if the tablet device can enter and send requests, then you need to remember a couple of methods:

1. You can check information on traffic consumption on tariffs from the Smart line by entering the combination * 100 * 1 #.
2. For options that were connected after the consumption of the main traffic, you should use the combination * 111 * 217 #.
3. For other mobile applications with traffic, you can find out the consumption by command * 217 #.

Detailing via modem

Through modems from the MTS operator, subscribers can also receive information on the consumption of megabytes. The procedure is similar to the options discussed in the article. The only difference is that the modem does not have a screen, so all information is displayed through the screen of a computer or laptop.

For modems, the provider has made a special program that is installed on the equipment (PC, laptop) after connecting the modem. It is this program that is a tool for management. For example, some devices have the ability to send service requests, similar to those used on phones and tablets. Since the MTS Connect tariff is more often used for the modem, the traffic consumption is checked through the request * 217 #. If it is not possible to register requests on the modem, then it is better to use a personal account on the website of the MTS operator.

Almost every user of the World Wide Web knows such a thing as Internet traffic. If speak about mobile operators, then they have, the greater the amount of available traffic, the higher the cost. Most operators have tariffs that do not have traffic restrictions, but their cost is significantly higher than that of analogues with restrictions.

Internet for personal computers, which is provided by providers, is most often estimated based on the speed of the Internet.

There are billions of computers on the World Wide Web. Some call servers - they store some information, others connect to these servers in order to receive this information. From this we conclude that computers exchange information with each other.

Data received from other computers is incoming traffic, while the data sent by your PC is outgoing. This category includes messages in VK, audio recordings, videos you uploaded and much more. The unit of measure is gigabyte, megabyte or kilobyte.

Many providers have a so-called "Grid" - this is a place on the network or the Internet organized by the service provider, being in which users can download movies, music and exchange other information, but at the same time consumable fee traffic is not charged. Only users of this particular provider have access to the "Grid".

It often happens that one computer starts sending data to another without the knowledge of the PC owner. This happens when the computer is infected virus. In this case, outgoing traffic is significantly increases. To avoid such unpleasant situations, you need to use antiviruses that track any malicious software and neutralize it, preventing information leakage.

How to find out the spent traffic

There are several ways to find out the amount of traffic used. Let's start with the simplest way.

We use the standard functionality

It gives us the opportunity to find out how much information was received and spent during the current internet session.

On the taskbar, find the icon that displays an active Internet connection.

By clicking on it, you will see list possible connections, you need to choose yours.

Click on it right click.

A window will appear that will display information about the connection duration, Internet speed, sent and received packets (this is traffic).

When you turn off your computer and the connection is lost, the data reset to zero.

If you have multiple accounts on your computer, then you can find out the same data on them. You will need to do the same manipulations.

Third party software

You can use special software to determine outgoing and incoming traffic. Here the choice is huge. We settled on the Networx program.

Very simple, informative, intuitive program.

After installation, it will always be on your taskbar. You can contact her at any time and get all the necessary information.

When you hover your mouse over the icon, the program will show you current internet speed.

If you click on it right click, then a window will pop up.

Clicking on the button statistics, you will receive traffic data, both current and per day, week, month, year, you can view the hourly report.

Traffic on mobile devices

On mobile devices, traffic is consumed much more economical. This is ensured by mobile versions of sites that are optimized specifically for the convenience of users accessing the Internet from gadgets.

The easiest solution to the issue is to install the application. Each provider has developed software for smartphones that reflects the full traffic statistics.

You can also find out the short number (it differs for operators). By sending an SMS to it, you will receive information on traffic in response.

Despite the obvious convenience of unlimited Internet tariffs, many users are satisfied with plans with prepaid traffic. And most often the reason for this is not their own choice, but the limitation of the technical capabilities of the provider. At the same time, at the end of the month, the question often arises: where to spend traffic? This is especially true if the unused volume simply burns out.

Instruction