How to set up mms manually in android. How to set up MMS on Android: An overview of the various ways. Set up MMS on Tele2

Setting up MMS on Android may be required in two cases. The first one is buying a new smartphone. The second is resetting existing settings to factory defaults. In any case, you need to change the configuration so that this service will work. This can be done in four ways:

• Automatically.
• With the help of a service center operator.
• By manually entering the required values.
• Using the operator's regional website.

All these methods will be considered in detail within the framework of this material.

Automatic setting

Automatic MMS setup on Android occurs with minimal human participation - this is its main plus. But the disadvantage is that it can be done only once - during the initial registration of the device in the mobile operator's network. After that, it is considered that everything is set up and there is no need to resend this data. Its order is as follows:

• We install the SIM card in the appropriate slot of the smartphone and assemble it.
• We turn on the device and, if necessary, enter the PIN code.
• As soon as the registration is completed, the search for the required values ​​in the operator's database begins. After they are found, this information is sent to the gadget.
• Next, the subscriber must accept the configuration profile and save it.

This completes the automatic tuning process. But the process of receiving and sending messages can be blocked. The activation procedure will be described later in the text.

Operator assistance

Unlike automatic, setting up MMS on Android with the help of a service center operator or by manual entry can be done many times - this is their plus. But on the other hand, in the process of their implementation, you need to perform certain manipulations, which slightly complicates the configuration process. Each of the operators has a free consultation number. For Beeline, this is 0611, for MTS - 0890, for Megafon - 0550. Next, following the instructions of the autoinformer, you need to establish a connection with the operator and order the necessary settings, which will then be sent to your smartphone. Then they need to be accepted and saved. After this operation, it is recommended to do a full reboot of the device, that is, turn it off and on. In some cases, you may need to activate the service. To do this, when calling the operator, please enable this service for this number. This completes the MMS setup on Android with the help of a service center operator.

Manual input

It is not always possible to call the service center, and MMS must be urgently received. In this case, the necessary settings can be set manually. To do this, go to the following address: "Applications"\"Settings"\"Networks"\"More"\"Mobile networks"\"APN". Then you need to enter the operator's parameters - this is the actual manual setting of MMS on Android. Beeline, for example, requires the following parameters:

• Profile name must be Beeline MMS.
• The home page in this case is http://mms/.
• Data transmission channel - GPRS.
• Access point - mms.beeline.ru.
• The IP address is 192.168.094.023.
• and the password are the same - beeline.

The rest of the values ​​remain unchanged. For MTS, you need to enter the following data:

• Profile name - MTS Center MMS.
• APN should be mms.mts.ru.
• Login and password in this case are identical - mts.
• Home page - http://mmsc.
• The IP address is 192.168.192.192.
• Port - 8080 (9201 may be used on some models).

As in the previous case, all other values ​​are left unchanged. Setting up MMS Megafon on Android requires the following values:

• The profile name is megafon.
• APN depends on the tariff plan. Here you need to look at the documentation that came with the starter pack.
• Login and password in this case are identical - gdata.
• The home page is http://mmsc:8002.
• IP address - 10.10.10.10.
• Port - 8080 (9201 may be used on some models).

We do not touch everything else and leave it as it is.

Another way...

Another way to get settings is to order them on the operator's regional website. To do this, on a computer connected to the Internet, through the search engine we find the page we need. Then select the smartphone model and enter the captcha and mobile number. Then we click "Submit". Within 5 minutes the necessary information will be received. We save and install the necessary profiles. If the requested information was not received within 5 minutes, it is better to repeat the order on the same regional website of the mobile operator. It is also recommended to do a full reboot of the phone. After that, we send and receive MMS. There shouldn't be any problems. If something does not work, we look for an error. As practice shows, somewhere they did something wrong. You can delete the old profile and do everything again.

Results

This article has described step by step what is on Android for various operators. As can be seen from everything previously said, there is nothing complicated about this. The happy owner of a new smartphone can easily cope with such a task. It is enough just to follow all the instructions, and you should not have any problems with this procedure.

In order to send someone a sound file, photo or video, it is not necessary to use e-mail - just use the MMS sending service. This service is used by a limited number of subscribers, but sometimes it is the only way to deliver multimedia information. For example, sending MMS is useful if the recipient does not have any tools to communicate with the outside world, except for a simple phone with MMS support. How to send MMS with MTS, how to set up your phone to receive multimedia messages, how to send a message for free - our review will tell you everything.

How to connect MMS on MTS

In order to connect MMS to MTS, you do not need to take any action - in most cases this service is enabled by default. If for some reason this is not the case, you should look into your Personal Account and activate the Mobile Internet service there (MMS works through data transfer services). If there is no access to the Internet, the service can be connected using the USSD command *111*18# or by sending an SMS with the text 2122 to the short service number 111.

There are no subscription fees and fees for connecting the Mobile Internet service. After that, you can set up your mobile phone and start messaging. The cost of sending MMS to MTS depends on the subscriber's tariff plan. To reduce the cost of MMS-exchange, a MMS package of 10 messages for 35 rubles for 30 days is provided.

How to set up MMS on MTS

In order to receive and send MMS messages, the subscriber will need a configured phone. Often settings are set automatically, immediately after inserting the SIM card into the phone. If this is not the case, you need order automatic settings by sending an empty SMS to service number 1234(or call toll-free number 0876). After saving the settings and rebooting the phone, you need to send a test MMS to 8890 (free of charge) - the network will understand that the phone is configured and can normally receive multimedia messages.

Otherwise, all received messages will go to the MTS MMS portal, and the recipient will receive SMS notifications with links to view MMS on the portal. If automatic settings for some reason do not come or are not installed, you should register them manually. How to do this depends on the specific phone model. The subscriber should go to the Internet access settings section and create profile with the following parameters(sometimes the MMS profile setting may be in the MMS settings section):

• Profile name - MMS MTS (or something else);
• Home page - http://mmsc;
• Data channel - GPRS;
• Access point - mms.mts.ru (without http://);
• IP address (proxy address) - 192.168.192.192;
• Proxy port - 9201 for old phones, 8080 for new phones;
• Username and password - mts.

The names of the settings may differ depending on the phone model. Parameters not listed in the overview should be left as is. After entering the parameters, select the specified profile in the MMS settings, reboot and send a test MMS to service number 8890.

How to send MMS to MTS from your phone

In order to send MMS from your mobile phone, you need to go to the section with messages and select the item to send messages there(“Send MMS” or simply “Send Message”, “New Message”, etc., depending on the device model). We add the necessary files to the message. The maximum MMS size is 300 kb, and phones can scale excessively large messages to the required size on their own.

Next, select the recipient or enter his number manually, after which we press the send button - after a few seconds (depending on the connection speed), the MMS will go to the recipient. The recipient's number must start with +7 is a prerequisite for sending MMS messages.

How to send MMS to MTS for free

Send MMS to MTS for free will help MTS official website There is a form for this here. We fill in the number of the recipient and sender, enter the title and text of the message (up to 1000 characters), add files or select a picture from the proposed gallery, and then click on the send button. The sender's phone number is specified to protect recipients from MMS spam - a confirmation SMS will be sent to the specified number. In addition, in the MMS sending form, you will need to go through an additional anti-spam. Service restrictions:

• Message size - no more than 300 Kb;
• Text size - no more than 1000 characters;
• Sending MMS from one IP - 1 MMS from 1 IP in two minutes;
• Sending MMS to the same number - 1 time in 2 minutes.

If the MMS recipient has activated the service "Prohibition of receiving informational SMS and SMS / MMS from the MTS website", then the message will not reach such a recipient.

How to watch MMS on MTS

In order to view the contents of an MMS, it must be extracted by clicking on the corresponding menu item. If your phone is set to receive MMS automatically, then you just need to open the delivered message. If the recipient's phone cannot receive MMS, then the messages will be available from the pages of the MMS portal, which was already mentioned in our review - follow the link specified in the SMS notification, enter the password and view the contents of the received message.

If you are tired of your operator

Guys, we know perfectly well that operators raise prices and force subscribers to connect services that the latter do not want to use. Fortunately, now there is a great opportunity to go to another operator with your number. There are virtual operators that provide very good rates and cool benefits when porting a number. One of them is Tinkoff Mobile, which is increasingly chosen by visitors to our site.

Articles and Lifehacks

What is mms settings on android? Today, such a service is no longer something new, but it continues to be one of the most convenient, given that various files, including photos and images, can be transferred via MMS. Many users specifically choose those cellular operators that provide batch MMS messages. For example, MTS offers its subscribers packages of 10, 20 or 50 messages, the MMS+ service (messages at a discount), as well as special tariff plans with unlimited MMS messages. There is even a free MMS Show! And without the help of experts.

Preparing MMS settings for Android

The reasons for the incorrect operation of MMS, as always, are banal (but these are definitely not problems with apple ones that often happen). And the first is the absence of such settings on the device at all. This means that they should be ordered from your mobile operator. After they are sent to the phone, they need to be saved.

Smartphones of the new generation, when first launched, together with the SIM card, identify the Internet and MMS settings themselves. However, this only applies to those SIM cards that already contain such information.

How to set up MMS by yourself? For this function to work correctly, after saving the settings, the mobile device must create 2 points, having received data via the GSM network or from the SIM card - an MMS messaging point and an Internet access point. If the SIM card is already many years old, it is unlikely that the phone will be able to independently identify itself in the network of the mobile operator. How to be in this case?

Instructions for setting up MMS on Android

How to set up mms on android? First you need to go to the "Settings" of the mobile device, the item "More". In different phone models, the item may be called differently - for example, “Communication settings” or analogues of such a phrase. Next, select the "Mobile network" option and click on it, after which the user will see the settings that are associated with his mobile operator.

The next item he needs is “Access Points” (“Access Points”, “APN”, etc.) Here you will need to create a new access point specifically for MMS. To do this, click on the auxiliary menu and select "New access point" ("Create APN"). Most likely, there will be no access point, but if it already exists, but MMS messages are still not being sent, you will need to delete it and create a new one.

For a new access point, you need a certain list of parameters, which you can find out from your cellular operator. For example, for Beeline subscribers they look like this: MMSC - http://mms/, Proxy -192.168.094.023:8080, APN - mms.beeline.ru, Username - beeline, Password - beeline. So, it remains to enter the correct parameters.

If MMS messages cannot be opened or sent on Android, the first step is to check the APN point settings. The configuration is sent by the operator when the phone is switched on for the first time with a new SIM card. However, the settings may fail or be incorrect after changing the SIM card.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

Reasons why MMS do not reach / arrive on Android

The main cause of problems with MMS is incorrect settings in the system. This is true for both the sending side and the receiving side. But there may be other reasons:

• The phone does not support the message format sent by another user.
• The size of the MMC is larger than the free space in the smartphone's memory.
• The feature is disabled or not supported by your plan.

First you need to check the MMS settings on the phone, and if they turn out to be correct, then the next step is to call the operator's support service.

Setting up MMS reception for Android

Any operator, whether it is a long-standing MTS or a relatively new Yota, sends Internet and MMS settings when you first install a SIM card in your phone. But some users ignore the configuration message and don't save the settings. As a result, attempts to use mobile traffic to access the Internet or send / receive MMS fail - Android does not understand what data to use to complete the task.

Therefore, in order to figure out why MMS is not loading on Android, you need to make sure that the necessary parameters have been added to the system. Each operator has its own identification data, but the procedure for setting up the Internet and MMS is the same for everyone.

Automatic setting

If you did not receive configuration messages or simply deleted it, do not know where the MMS and Internet settings are stored, then use the opportunity to order parameters from the operator. Each provider has a special number for calling or sending SMS with a specific text. Example for the Russian Federation:

• MTS - a call to 0876 or an empty SMS to 1234. You can order separately MMS settings by sending "MMS" to 1234.
• Beeline - command *110*181# or call to number 060432.
• Tele2 - call to 679.
• Megafon - send "3" to 5049.

In addition, each operator on the official website has a subscriber's personal account through which you can manage services, including ordering Internet settings and MMS. Authorization in your personal account is carried out using the phone number and password received in SMS.

Manual setting of MMC

If automatic setup does not work (the operator does not send the settings, or they are not saved in the phone), add the settings manually. You can view them on the website of the mobile provider in the "Help and Support" section. To perform manual configuration, you need to know where the MMS settings are stored in Android. The following instruction will help:

1. Open your phone settings and go to the "Data transfer" section.
2. Turn on mobile data by sliding the switch to the active position.
3. Return to the settings menu. Open the "More" section.
4. Go to "Mobile networks" and select "APNs".
5. Call the additional menu and choose to add a new point.

Depending on the model of your smartphone, the names of the items may vary slightly, due to the Android shell of your smartphone manufacturer.

The APN setup menu will appear, in which you must specify the MMC parameters provided by the operator. They are the same for all Android versions. For example, to set up MMS on Tele2, you must fill in the following fields:

1. Name - Tele2 MMS.
2. APN - mms.tele2.ru.
3. MMSC - http://mmsc.tele2.ru.
4. Proxy - 193.12.40.65.
5. Port - 8080.
6. Authentication - no.
7. Type APN - mms.

After entering the connection parameters, save the configuration, restart your smartphone and try sending an MMS or ask a friend to send you a photo message. To set up MMS for other operators, use the table below or find the parameters on the official websites of mobile providers.

Modernity is the era of new technologies. Fifty years ago, no one could have imagined that today we would be able to send our favorite images, music to the other side of the country. Tell about your impressions not with the help of words, but by sending a "documentary film" of our life. One such possibility is MMS. Multimedia messages have gained significant popularity with the advent of smartphones.

What is MMS

We are all familiar with text messages and use them quite regularly, but they cannot send any image or sound. The MMS service was created specifically for this. The name itself is an abbreviation that translates into Russian as “multimedia messaging service”. It seems incredible, but in the US and Norway, more than two-thirds of the total is accounted for by MMS. There is a version that the technology was developed by the first providers for paid storage of photos taken from users' phones on their servers.

The difference between MMS and SMS is that thanks to it you can send not only text, but also an image, sound, presentation or video. You can combine all this with each other or with text, provided that the size does not exceed 999 kB in the end (in some phones, the size is limited to 100 kB). Almost all operators have support for this type of message. In order to successfully send MMS, 3 and 4G protocols are required. This is UMTS and above. Previously, low-speed data could be transmitted via GPRS, but today this does not look serious.

Packet transmission can be used for any purpose, but is usually used specifically for accessing the Internet. Because it is convenient to conduct billing not by time, as in a telephone conversation, but by the amount of information transmitted. Which is what is required in this case. MMS are delivered in a fundamentally different way. It was found that not every message the recipient wants to read. Therefore, to save traffic, the data is delivered to the server, from where a brief request about the presence of the package comes. The shelf life usually does not exceed 3 days.

Information of network protocols is transmitted at the moment when there are free voice channels formed by frequency and code methods. It is believed that the operator himself decides what kind of information to give the prerogative, but if the quality of voice communication deteriorates sharply, then many will want to change their mobile operator. Be that as it may, with the introduction of smartphones, multimedia messages have become so popular that the priority problem has had to be reconsidered in recent years: in the US, many are dissatisfied with the service!

Not all phones support MMS because it requires some minimal capabilities. And the first of them is access to the Internet. Cheap phones can't do this because they don't have the hardware and software to do it. Physically, the phone can receive encoded information, because the transmission is on the same frequency, but it is not able to decrypt and display it: there are no decoders and multimedia playback tools.

Setting up MMS

Before setting up your phone, you need to make sure that the operator cannot do it himself. For example, MTS claims that no settings are required at all. The service is provided automatically, provided that the package includes the ability to access the Internet. If MMS does not work, then you need to go here (www.mts.ru/mobil_inet_and_tv/help/settings/settings_phone/) and enter your phone number in the field by filling in the captcha.

After sending, MTS will kindly inform you whether the operation was successful. In our case, it could not pass successfully, because the package does not include Internet access services. Which is what we were informed about. MTS is always on guard. If the settings do not want to be applied or saved, then you need to adjust the data manually. For this, the provider provides point by point:

1. Internet.

Rather, we move on to the last section to see what interesting things they say there. In the window that opens, the following sub-items are offered (very competently):

1. iOS for the new sixth generation iPhone.
2. Other gadgets from Apple.
3. Devices with Android operating system.
4. Phones with Windows.
5. Other non-smartphone devices.

Ordinary phone

An old phone with CSD technology is shown, which was later replaced by GPRS. Therefore, the settings are carried out taking into account this archaic feature. In the menu, you need to enable the use of GPRS, because by default there will be an attempt to transfer data without packets via CSD.

Then we proceed to set the ip-address 192.168.192.192 and the transfer port 9201.

It's time to enter the MMS server address.

MTS has already created its own profile for us, it remains only to activate it.

And yet we check if the settings have changed over the past 10 years.

No, everything remains the same. Login: mts, and the password is the same. To activate the service, send a trial MMS to the free number 8890.

Trying to set up Android

Under Android operating systems, you need to go to the settings, find Wireless networks there. Since any communication goes through the air, this is the only option for a smartphone.

The ultimate goal is to find the Access Points subsection. We create a new one.

Enter the access point settings according to the list, if necessary, specify the MMS WAP 2.0 transmission protocol.

After that, you need to send an MMS to the free number 8890.

Send MMS

Service packages

In a typical case, MMS setup goes through a request for a short or regular number (see above). Several services are connected at the same time. MMS at the mobile operator goes side by side with the Internet 3/4G. If you do not understand, you can call the support service or use the hotline - they will help you there. If your device supports two SIM cards, take your time to activate the service, study the tariffs and choose the most advantageous one for your usage level. Next, let's look at how to set up MMS on your phone.

The next steps will depend on what brand of phone you have. We will cover the iOS and Android platforms.

MMS for Apple

Let's take a step-by-step look at what needs to be done with the phone so that the multimedia messaging service works for you.

1. First of all, you need to go to the home menu and get into the "Settings".
2. In the drop-down menu, select the "Basic" sub-item.
3. The next inscription that you need to click on is “Network”.
4. Further "Cellular data network".
5. Having reached this point, you will need internet from another resource. Here you need to enter the operator settings. You can find them either simply on the Internet, or by referring to the information from the official website, which, of course, is preferable. The fact is that they are sometimes changed, and the operator's resource has the latest data.
6. After you have entered all the necessary information, be sure to restart the device.
7. The next step is to add the SIM card number. Again you need to go to the "Settings" settings and select the "Phone" sub-item.
8. In the "My number" field, you need to drive in the number of the SIM card through which you connected the mobile Internet service.
9. In order for the media service to work, you need to restart your phone again.

These 9 points will help you enable the MMS transfer function. If you have done everything, but the Internet does not work, check everything again, starting from the first point. If everything is correct, and the connection is still not established, try to find other data to fill in the operator settings. Even if this fails, do not despair and call the support service.